Crankshaft Position Sensor - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (1). Remove bolt (2) and crankshaft position sensor (3) .
Show/hide table
 | |
| Illustration 1 | g01267552 |
Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install crankshaft position sensor (3). Install bolt (2). Connect harness assembly (1) .
Show/hide table
| | |
| Illustration 2 | g01267552 |
Caterpillar Information System:
C15 On-Highway Engine Camshaft Position Sensor - Remove and Install
C15 On-Highway Engine Fuel Temperature Sensor - Remove and Install
3044C Industrial Engine Product Lifting
C13 On-highway Engine Cylinder Block
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Flywheel Load Cell - Calibrate
336E Excavator Machine System Specifications Sprocket
2006/05/15 A New Air Lines Group is Used {1071}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050} Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Specifications
C13 On-highway Engine Engine Oil Pan
2007/04/09 Improved Battery Chargers For Gensets are Available {1406}
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies UPS Operating Parameters
TA19-M2WD and TA19-M4WD Agricultural Transmissions Clutch (Front Wheel Assist) - Remove
3500B Industrial Engines with the ADEM 3 Electronic Control Module Prelubrication System
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Hardware Revision - Version 3.0 Design
C15 On-Highway Engine Engine Oil Pressure Sensor - Remove and Install - Variable Intake Valve Actuator
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (SMS Bypass Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (Input/Output Cabinet)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Clutch (Front Wheel Assist) - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (Flywheel Cabinet)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Clutch (Front Wheel Assist) - Disassemble
TH48-E70 Petroleum Transmission Capacities (Refill)
3500B Industrial Engines with the ADEM 3 Electronic Control Module Pulse Width Modulated Sensor