Piston Pump (Steering and Implement) - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-9200     | Lever Puller Hoist     | 1     |
Start By:
- Remove the fourth bottom guard. Refer to Disassembly and Assembly, "Bottom Guards - Remove".
- Remove the floorplates.
- Drain the hydraulic oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
- Disconnect clips (2), (4), and (8). Remove cable straps (5) and place harness assemblies (6) and (7) to the side. Remove cable straps (1) and place harness assembly (3) to the side.
Show/hide table
Illustration 1 | g01266560 |
- Disconnect hose assemblies (9) and (10). Disconnect tube assembly (11) from the bottom of the piston pump.
Show/hide table
Illustration 2 | g01266561 |
- Disconnect tube assembly (13). Place hose assemblies (12) to the side. Tube assembly (13) will remain with the piston pump.
Show/hide table
Illustration 3 | g01266562 |
- Disconnect hose assembly (15). Place block assembly (14) to the side.
Show/hide table
Illustration 4 | g01266563 |
- Attach Tooling (A) to the top of the cab and piston pump (16), as shown. The weight of piston pump (16) is approximately 68 kg (150 lb). Remove bolts (17) and remove piston pump (16) .
Show/hide table
Illustration 5 | g01266565 |
Show/hide table
Illustration 6 | g01266567 |
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Machine Systems Joystick Control and Pilot Valve (Grapple) - Install
525C, 535C and 545C Wheel Skidders Machine Systems Joystick Control and Pilot Valve (Grapple) - Remove
631G and 637G Wheel Tractor-Scrapers Machine Systems Fuel Tank - Remove and Install
D3K, D4K and D5K Track-Type Tractors Track - Check/Adjust
AccuGrade® GPS (CD700) Display Description
C4.4 Industrial Engine Electronic Control System
854K Wheel Dozer Radiator Core - Clean
Instructions for Field Conversion to a Electrohydraulic Joystick{5705} Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Assembly Procedure for the 844H Wheel Dozer{7000, 7960} Assembly Procedure for the 844H Wheel Dozer{7000, 7960}
C9 On-highway Engine Electronic Unit Injector Wiring
525C, 535C and 545C Wheel Skidders Machine Systems Cab - Install
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Hydraulic Control
D7R Series II Track-Type Tractor Machine Systems Piston Pump (Steering and Implement) - Install
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
C9 On-highway Engine Cylinder Block Cover Group
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Temperature Sensor (Transmission Oil)
AccuGrade® GPS (CD700) Startup
AccuGrade® GPS (CD700) Display Navigation
2006/05/01 The Joystick On Small Track-Type Tractors Has Been Replaced {4122, 5705}
Underground Articulated Trucks Truck Payload Measurement System System Schematic
Underground Articulated Trucks Truck Payload Measurement System General Information
Underground Articulated Trucks Truck Payload Measurement System Truck Payload Measurement System Troubleshooting
854K Wheel Dozer Seat
AccuGrade® GPS (CD700) Plan View