Joystick Control and Pilot Valve (Grapple) - Install
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Position joystick control (11) and install screws (12).
Show/hide table
Illustration 2 g01266640 - Connect harness assembly (9) and install cover (10).
Show/hide table
Illustration 3 g01266638 - Install cover (8) and screws (7).
Show/hide table
Illustration 4 g01266634 - Install covers (6) and connect switches (5).
Show/hide table
Illustration 5 g01266630 - Connect tube assemblies (3) and harness assembly (4).
Show/hide table
Illustration 6 g01269010 - Install guard (2) and bolts (1).
Show/hide table
Illustration 1 | g01266642 |
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Machine Systems Joystick Control and Pilot Valve (Grapple) - Remove
631G and 637G Wheel Tractor-Scrapers Machine Systems Fuel Tank - Remove and Install
D3K, D4K and D5K Track-Type Tractors Track - Check/Adjust
AccuGrade® GPS (CD700) Display Description
C4.4 Industrial Engine Electronic Control System
854K Wheel Dozer Radiator Core - Clean
Instructions for Field Conversion to a Electrohydraulic Joystick{5705} Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Assembly Procedure for the 844H Wheel Dozer{7000, 7960} Assembly Procedure for the 844H Wheel Dozer{7000, 7960}
C9 On-highway Engine Electronic Unit Injector Wiring
525C, 535C and 545C Wheel Skidders Machine Systems Cab - Install
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Hydraulic Control
525C, 535C and 545C Wheel Skidders Machine Systems Cab - Remove
D7R Series II Track-Type Tractor Machine Systems Piston Pump (Steering and Implement) - Remove
D7R Series II Track-Type Tractor Machine Systems Piston Pump (Steering and Implement) - Install
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
C9 On-highway Engine Cylinder Block Cover Group
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Temperature Sensor (Transmission Oil)
AccuGrade® GPS (CD700) Startup
AccuGrade® GPS (CD700) Display Navigation
2006/05/01 The Joystick On Small Track-Type Tractors Has Been Replaced {4122, 5705}
Underground Articulated Trucks Truck Payload Measurement System System Schematic
Underground Articulated Trucks Truck Payload Measurement System General Information
Underground Articulated Trucks Truck Payload Measurement System Truck Payload Measurement System Troubleshooting
854K Wheel Dozer Seat