Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1) and guard (2).
Show/hide table
Illustration 2 g01266630 - Disconnect tube assemblies (3) and harness assembly (4).
Show/hide table
Illustration 3 g01266634 - Disconnect switches (5) and remove covers (6).
Show/hide table
Illustration 4 g01266638 - Remove screws (7).
- Remove cover (8).
Show/hide table
Illustration 5 g01266640 - Reposition cover (10) and disconnect harness assembly (9).
- Remove cover (10).
Show/hide table
Illustration 6 g01266642 - Remove screws (12) and joystick control (11).
| |
| Illustration 1 | g01269010 |
