Transmission Hydraulic Control
Show/hide table
Illustration 1 | g00911898 |
(3) Solenoid for number two clutch
(4) Solenoid for number one clutch (5) Solenoid for number three clutch (6) Solenoid for number four clutch (7) Solenoid for number six clutch (8) Solenoid for number five clutch |
(1) Torque for the 12 bolts ...
(2) Torque for the 12 bolts ...
Show/hide table
Speed And Direction | Engaged Clutches |
First Speed Forward | No. 1 and No. 6 |
Second Speed Forward | No. 1 and No. 4 |
Third Speed Forward | No. 1 and No. 5 |
Fourth Speed Forward | No. 2 and No. 5 |
Neutral | - |
First Speed Reverse | No. 3 and No. 6 |
Second Speed Reverse | No. 3 and No. 4 |
Third Speed Reverse | No. 3 and No. 5 |
Caterpillar Information System:
AQUILATM AQMStudio Configuration
773F and 775F Off-Highway Truck Power Train Differential and Bevel Gear
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Pressure Switch (Power Train Oil Filter Bypass)
568 GF and 568 LL Forest Machine Window Washer Reservoir - Fill
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System Power Supply Circuit of Electronic Control Module
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System Switch Circuits
Connecting Rod Bearings{1218, 1219} Connecting Rod Bearings{1218, 1219}
992G Wheel Loader and 854G Wheel Dozer Power Train Speed Sensor (Transmission Output)
C27 and C32 Engines for Caterpillar Built Machines Camshaft - Install - C27
773E and 773F Off-Highway Truck and 775E and 775F Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Install - C27
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove - C27
AQUILATM AQMStudio General Information
AQUILATM AQMStudio Installation
AQUILATM AQMStudio Map File
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Cylinder (Hood Tilt) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Brake Pads - Remove and Install
C4.4 Industrial Engine Electronic Control System
2006/05/22 A New Storage Position for the Mud Guards Is Available when the Machine Is Transported {4220}
Potential Vibratory Pump Failures on CP-533E and CS-533E Vibratory Soil Compactors{5050, 5095} Potential Vibratory Pump Failures on CP-533E and CS-533E Vibratory Soil Compactors{5050, 5095}
M325D L MH and M325D MH Material Handlers Hydraulic System Flow (Medium Pressure/Cab Riser Function) - Adjust
777E and 777F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0296 - FMI 14
120M and 12M Motor Graders Hydraulic System Oil - Change