938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Caterpillar


Pressure Switch (Power Train Oil Filter Bypass)

Usage:

938H JKM


Illustration 1g00724572

(1) Torque for final installation of the switch ... 5.5 ± 1.5 N·m (50 ± 13 lb in)

Actuation pressure ... 276 ± 28 kPa (40 ± 4 psi)

Deactuation pressure (minimum) ... 179 kPa (26 psi)

The switch is normally closed below the deactuation pressure.

Caterpillar Information System:

568 GF and 568 LL Forest Machine Window Washer Reservoir - Fill
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System Power Supply Circuit of Electronic Control Module
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System Switch Circuits
Connecting Rod Bearings{1218, 1219} Connecting Rod Bearings{1218, 1219}
992G Wheel Loader and 854G Wheel Dozer Power Train Speed Sensor (Transmission Output)
C27 and C32 Engines for Caterpillar Built Machines Camshaft - Install - C27
773E and 773F Off-Highway Truck and 775E and 775F Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Install - C27
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove - C27
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - C27
773F and 775F Off-Highway Truck Reference Material
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install - C27
773F and 775F Off-Highway Truck Power Train Differential and Bevel Gear
AQUILATM AQMStudio Configuration
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Hydraulic Control
AQUILATM AQMStudio General Information
AQUILATM AQMStudio Installation
AQUILATM AQMStudio Map File
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Cylinder (Hood Tilt) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Brake Pads - Remove and Install
C4.4 Industrial Engine Electronic Control System
2006/05/22 A New Storage Position for the Mud Guards Is Available when the Machine Is Transported {4220}
Potential Vibratory Pump Failures on CP-533E and CS-533E Vibratory Soil Compactors{5050, 5095} Potential Vibratory Pump Failures on CP-533E and CS-533E Vibratory Soil Compactors{5050, 5095}
M325D L MH and M325D MH Material Handlers Hydraulic System Flow (Medium Pressure/Cab Riser Function) - Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.