Control Manifold (Pilot) (Differential Lock) - Disassemble
Start By:
- Remove the control manifold. Refer to Disassembly and Assembly, "Control Manifold (Pilot) (Differential Lock) - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Remove valve (1).
- Remove O-ring seal (2), O-ring seal (3), and backup ring (4) from valve (1).
- Remove valve (8).
- Remove backup ring (5), O-ring seal (6), and O-ring seal (7) from valve (8).
- Remove plug (9) and O-ring seal (10).
Show/hide table
Illustration 2 g01270280 - Remove nut (20) and coil assembly (18) from cartridge assembly (19).
- Remove backup ring (12), O-ring seal (14), backup ring (16), backup ring (11), O-ring seal (13), backup ring (15), and O-ring seal (17) from cartridge assembly (19).
Show/hide table
Illustration 3 g01270282 - Remove fitting (23), O-ring seal (22) and screen (21).
Show/hide table
Illustration 1 | g01270279 |
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Machine Systems Control Manifold (Pilot) (Differential Lock) - Install
525C, 535C and 545C Wheel Skidders Machine Systems Control Manifold (Pilot) (Differential Lock) - Remove
Filtration Procedure for (D7- D11) Track-Type Tractor Hydraulic Oil {0680, 0738, 0768, 5050, 5056} Filtration Procedure for (D7- D11) Track-Type Tractor Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
525C, 535C and 545C Wheel Skidders Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
525C, 535C and 545C Wheel Skidders Power Train Transmission Oil Pump - Install
525C, 535C and 545C Wheel Skidders Power Train Transmission Oil Pump - Remove
992G Wheel Loader and 854G Wheel Dozer Power Train Speed Sensor (Transmission Output)
Underground Articulated Trucks Truck Payload Measurement System System Components
Underground Articulated Trucks Truck Payload Measurement System Calibration
Underground Articulated Trucks Truck Payload Measurement System General Information
AccuGrade® GPS (CD700) System Components
C27 and C32 Engines for Caterpillar Built Machines Camshaft - Install - C27
525C, 535C and 545C Wheel Skidders Machine Systems Control Manifold (Pilot) (Differential Lock) - Assemble
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Pressure Switch (Power Train Oil Filter Bypass)
2006/05/08 Improved Design For Alternator Guard {7168}
525C, 535C and 545C Wheel Skidders Machine Systems Cab - Remove
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Hydraulic Control
525C, 535C and 545C Wheel Skidders Machine Systems Cab - Install
C9 On-highway Engine Electronic Unit Injector Wiring
Assembly Procedure for the 844H Wheel Dozer{7000, 7960} Assembly Procedure for the 844H Wheel Dozer{7000, 7960}
Instructions for Field Conversion to a Electrohydraulic Joystick{5705} Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
854K Wheel Dozer Radiator Core - Clean
C4.4 Industrial Engine Electronic Control System
AccuGrade® GPS (CD700) Display Description