C7 PETROLEUM Petroleum Engine Caterpillar


Cylinder Head - Remove

Usage:

C7 C7P

拆卸步骤

开始:

  1. 拆下摇臂和摇臂轴。 请参阅拆解和组装, "摇臂和摇臂轴 - 拆卸"。
  2. 拆下电子单体喷油器。 请参阅拆解和组装, "电子单体喷油器 - 拆卸"。
  3. 拆下气门机构罩盖底座。 请参阅拆解和组装, "气门机构罩盖底座 - 拆卸和安装"。
  4. 拆下风扇驱动装置。 请参阅拆解和组装, "风扇驱动装置 - 拆卸"。


注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。


  1. 将冷却液从冷却系统中排入合适的容器,以便保存或弃置。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。



    图 1g01259334

  1. 拆下螺栓 (7) ,然后拆卸支撑组件 (8) 。 松开到水温调节器 (3) 的软管组件 (6) 。

  1. 断开线束组件 (4) 。

  1. 断开管组件 (5) 。

  1. 拆下螺栓 (1) 和 (2) 以及垫圈。



    图 2g01259335

  1. 将适当的起吊设备连接到缸盖 (9) 。 缸盖 (9) 的重量约为 108 kg (238 lb)。 拆下缸盖 (9) 和密封垫。

Caterpillar Information System:

C4.4 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
Update of the Initial Flash Procedure for the Primary ECM{0785, 7620} Update of the Initial Flash Procedure for the Primary ECM{0785, 7620}
Bench Test Procedure for a CX31 On-Highway Transmission and CX31-P600 Petroleum Transmission {3030, 3073} Bench Test Procedure for a CX31 On-Highway Transmission and CX31-P600 Petroleum Transmission {3030, 3073}
3500B and 3500C Locomotive Engines Sensor Supply
3500B and 3500C Locomotive Engines Pulse Width Modulated Sensor
C4.4 Industrial Engine Introduction
C7 PETROLEUM Petroleum Engine Rocker Arm - Assemble
C7 PETROLEUM Petroleum Engine Rocker Arm and Shaft - Install
C7 On-Highway Engine Fan Drive Mounting Group - Remove and Install
3456 Generator Sets Maintenance Interval Schedule - Standby Generator Sets
3456 Generator Sets Maintenance Interval Schedule - Prime Power Generator Sets
C7 PETROLEUM Petroleum Engine Rocker Arm - Disassemble
3500B and 3500C Locomotive Engines Starting Motor System
C15 and C18 Petroleum Generator Sets Generator Lead - Check
C7 On-Highway Engine Clean Gas Induction Valve - Install
C4.4 Industrial Engine Fuel System Secondary Filter - Replace
C7 On-Highway Engine Combustion Head - Remove and Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Startup (MMS) - Multiple Module System
C4.4 Industrial Engine Basic Engine
2006/04/01 Replacement Criteria for Camshafts {1210}
2006/04/03 Replacement Criteria for Camshafts {1210}
3500B and 3500C Locomotive Engines Start/Run/Stop Switch
C7 PETROLEUM Petroleum Engine Cylinder Head - Install
2006/05/01 New Location for the Magneto's Vent {1552}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.