Correction to Specifications , "Main Control Valve" {5051}
- Wheel Loader:
- 966GSeries II (S/N: AXJ1-UP; AXL1-UP; ANT1-UP; AWY1-UP; ANZ1-UP; AWZ1-UP)
- 972GSeries II (S/N: AXC1-UP; AXE1-UP; AXN1-UP; AWP1-UP; AXP1-UP; ANY1-UP)
Note: A 1U-0471 Shim (14) must be in contact with spring (15). Use the required number of shims in order to achieve a spring force value of 290 ± 10 N·m (210 ± 7 lb ft). Adjust the spring force value with the retainers and the springs at 75.00 ± 0.10 mm (2.953 ± 0.004 inch).
Caterpillar Information System:
993K Wheel Loader Engine Crankcase Breather - Clean
844H Wheel Dozer Machine Systems Main Control Valve - Install
844H Wheel Dozer Machine Systems Main Control Valve - Remove
844H Wheel Dozer Machine Systems Main Control Valve - Assemble
844H Wheel Dozer Machine Systems Main Control Valve - Disassemble
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) General Information
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Assemble
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Disassemble
12M, 140M and 160M Motor Graders Hydraulic and Steering System Pump Efficiency (Piston Pumps) - Test
973C Does Not Track Straight While Digging{3174, 3203} 973C Does Not Track Straight While Digging{3174, 3203}
844H Wheel Dozer Machine Systems Lift Cylinder - Remove and Install
844H Wheel Dozer Machine Systems Tilt and Tip Cylinder - Remove and Install
854K Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Remove
844H Wheel Dozer Machine Systems Pilot Operated Hydraulic Control (Joystick) - Install
C9.3 Tier 4 Final Engines Coolant Temperature Sensor
D7R Series 2 Track-Type Tractor Machine Systems Cab Mounting
844H Wheel Dozer Machine Systems Selector and Pressure Control Valve (Secondary Steering) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test
2006/05/29 New Articulated Mirror Supports Being Used {7319}
844H Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
844H Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect
Installation of the 288-6536 Control Valve Conversion Gp (Third Valve Kit){5051} Installation of the 288-6536 Control Valve Conversion Gp (Third Valve Kit){5051}
Installation of the 290-3538 Control Valve Conversion Gp (Third Valve Kit){5051, 5057, 5059, 5063} Installation of the 290-3538 Control Valve Conversion Gp (Third Valve Kit){5051, 5057, 5059, 5063}
C27 and C32 Engines for Caterpillar Built Machines Engine Fan Speed Sensor Circuit - Test