- Generator Set:
- C18 MGS (S/N: MGS1-UP)
- Marine Engine:
- C12 (S/N: C1Z1-UP)
- 3126 (S/N: 1ZJ1-UP)
- 3126B (S/N: 3GS1-UP)
- 3196 (S/N: 2XR1-UP)
- 3406E (S/N: 9WR1-UP)
- 3412E (S/N: 9KS1-UP; 9PW1-UP)
- C-12 (S/N: 9HP1-UP)
- C15 (S/N: RLA1-UP)
- C18 (S/N: CKH1-UP; C1J1-UP; CYN1-UP)
- C30 (S/N: CLX1-UP)
- C7 (S/N: C7X1-UP)
- C9 (S/N: CSN1-UP)
- C32 (S/N: RXB1-UP)
Description of Change: A new replacement kit for the bezel is now used on the integrated control head. The new kit that replaces the bezel has an improved chrome plating process in order to eliminate corrosion and scratches. A new graphic overlay 276-4054 Film is available for the round Caterpillar decal on the integrated control head.
Illustration 1 | g01249984 |
(1) Decal
(2) Integrated Control Head
(3) Bezel Kit
(4) Screws
Adaptable To: . The 276-4055 Bezel Kit is a direct replacement of the original bezel on the 219-8022 Direction and Speed Control Gp (INTEGRATED CONTROL HEAD, CHROME). 287-0564 Bezel Kit (BLACK) is a direct replacement of the original bezel on the 220-2313 Direction and Speed Control Gp (INTEGRATED CONTROL HEAD, BLACK). The 287-0563 Bezel Kit (GOLD) is a direct replacement of the original bezel on the 220-2315 Direction and Speed Control Gp (INTEGRATED CONTROL HEAD, GOLD).
Note: Apply a small amount of silicone sealant to the four screws. Tighten screws 0.2 ± 0.1 N·m (2 ± 1 lb in). Do not overtighten the screws.Use glass cleaner or a 25 percent solution of mild detergent in order to clean the finish of the integrated control head. Use a non-abrasive cloth to clean the integrated control head. Remove all cleaning solutions by thoroughly rinsing with clear water.