Slide Sledge Heavy Equipment Repair Tools Are Now Available {0599, 0644}
- Caterpillar Products:
- All
ReferenceSee Information Release Memo (IRM), SSTPC06-02, "Slide Sledge Heavy Equipment Repair Tools Available From Caterpillar" for additional information.
Slide Sledge tools are now available from Caterpillar. Slide Sledge tools can be used in place of hammers and chisels in a variety of applications. Refer to Table 1.
Show/hide table
| Slide Sledge Heavy Equipment Slide Hammers | |
| Part Number | Description |
| 272-1208 | Slide Hammer Group (9 lb) (1) |
| 272-1212 | Slide Hammer Group (12 lb) (1) |
| 272-1215 | Slide Hammer Group (14 lb) (1) |
| 272-1218 | Slide Hammer Group (21 lb) (1) |
Show/hide table
| ( 1 ) | 272-1237 Pin Driver is included. |
Additional tips and adapters are available for use with Slide Sledge Heavy Equipment Slide Hammers. Refer to Table 2.
Show/hide table
| Tips and Adapters | |
| Part Number | Description |
| 272-1222 | Tip Set (Tie Rod) |
| 272-1223 | Tip Set (Tie Rod) |
| 272-1224 | Tip Set (Separator Fork) |
| 272-1225 | Tip Set (Separator Fork) |
| 272-1226 | Tip Set (Separator Fork) |
| 272-1227 | Tip Set (Separator Fork) |
| 272-1228 | Pin Driver |
| 272-1230 | Pin Driver |
| 272-1233 | Pin Driver |
| 272-1237 | Pin Driver |
| 272-1239 | Pin Driver |
| 272-1240 | Pin Driver |
| 272-1241 | Tip Set |
| 272-1242 | Tip (Pin Inserter) (Ripper Tooth) |
| 272-1243 | Tip (Pin Remover) (Ripper Tooth) |
| 272-1244 | Tip (Pin Remover) (Ripper Tooth) |
| 272-1245 | Tip (Pin Remover) (Ripper Tooth) |
| 272-1246 | Tip (Pin Remover) (Ripper Tooth) |
| 272-1247 | Tip (Pin Inserter) (Ripper Tooth) |
| 272-1248 | Bushing Adapter |
| 272-1249 | Adapter (Race) (Bearing) (Seal) |
| 272-1250 | Bushing Adapter |
| 272-1251 | Tip (Scarifier) |
| 272-1252 | Tip (Wedge) (Utility) |
| 272-1253 | Handle Weight |
Slide Sledge tools and adapters are currently stocked in NACD Distribution Centers. Slide Sledge products are only available to NACD Dealers for stock or emergency orders.
Caterpillar Information System:
C7 Marine Engines Oil Cooler (Transmission, Auxiliary) - Remove and Install
3512C and 3516C Engines Pulse Width Modulated Sensor
3500 Engines Balancer Group (Front) - Remove and Install - 3508C Engine
D Series Excavator Monitoring System Performance Mode
3406E, C-10, C-12, C-15, C-16 Truck Engines Reference Material
C13, C15, and C18 Generator Set Engines CID 1690 FMI 08 Throttle #2 Position Sensor abnormal frequency, pulse width, or period
3500 Engines Housing (Front) - Install
C7 Marine Engines Unit Injector Hydraulic Pump - Install
C15 and C18 Petrolem Generator Set Engines Diagnostic Code Cross Reference
C7 Marine Engines Unit Injector Hydraulic Pump - Remove
3508C, 3512C and 3516C Marine Engines Housing (Front) - Remove
C7 Marine Engines Electronic Control Module - Remove and Install
3512C and 3516C Engines Speed Control
3512C and 3516C Engines Starting Motor System
C15 and C18 Generator Set Engines Electronic Control Module - Remove and Install
C175 Generator Set Engines Engine Oil Pump - Remove
C15 and C18 Generator Set Engines Alternator - Remove and Install
CX31 and CX31 HT On-Highway Transmissions General Troubleshooting Information
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554} Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
C3.3 and C4.4 Rental Generator Sets Additional Messages
C15 and C18 Generator Set Engines CID 0091 FMI 08 Throttle Position signal abnormal
C175 Generator Set Engines Engine Oil Pump - Install
C15 and C18 Generator Set Engines Electric Starting Motor - Remove and Install
3512C and 3516C Engines Sensor Supply