3508C, 3512C and 3516C Marine Engines Caterpillar


Accessory Drive (Front) - Install - Engine Oil Pump and Water Pump

Usage:

3512C 2A2

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g01132545

  1. 将 O 形密封圈安装到泵接头组件 (5) 中。 将干净的发动机油涂抹在泵接头组件 (5)的前壳体 (3)内的孔中。

  2. 将泵接头组件 (5)置于前壳体内,然后安装螺栓 (4)。


    图 2g01132543

  3. 将 O 形密封圈安装在泵接头组件 (1)中。 将干净的发动机油涂抹在泵接头组件 (1)的前壳体 (3)内的孔中。

  4. 将泵接头组件 (1)置于前壳体内,然后安装螺栓 (2)。

结束:

  1. 安装水泵。 请参阅拆解和组装, "水泵 - 安装"。

  2. 安装发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 安装"。

  3. 安装辅助水泵。 参考拆解与组装, "辅助水泵 - 安装"。

Caterpillar Information System:

Procedure for Adding Filtration Capability to Solvent Stands {0680} Procedure for Adding Filtration Capability to Solvent Stands {0680}
C15 and C18 Generator Set Engines E085 Engine Shutdown Overridden
3512 Industrial Engine Engine Design
3512C and 3516C Engines Prelubrication System
C15 and C18 Generator Set Engines E197 High Engine Oil Temperature
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Remove - Engine Oil Pump and Water Pump
Electronic Injector Height Adjustment and Setting{1251, 1290} Electronic Injector Height Adjustment and Setting{1251, 1290}
3512C and 3516C Engines Engine Speed/Timing Sensor
3512C and 3516C Engines Engine Control Switch (ECS)
C15 and C18 Generator Set Engines Crankshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines E539 High Intake Manifold Air Temperature
24M Motor Grader Machine Systems Alarm (Action)
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Pager Configuration
C15 and C18 Generator Set Engines Event Codes
C9 On-highway Engine Water Temperature Regulator Housing
C7 Marine Engines Electronic Control Module - Remove and Install
3508C, 3512C and 3516C Marine Engines Housing (Front) - Remove
C7 Marine Engines Unit Injector Hydraulic Pump - Remove
C15 and C18 Petrolem Generator Set Engines Diagnostic Code Cross Reference
C7 Marine Engines Unit Injector Hydraulic Pump - Install
3500 Engines Housing (Front) - Install
C13, C15, and C18 Generator Set Engines CID 1690 FMI 08 Throttle #2 Position Sensor abnormal frequency, pulse width, or period
3406E, C-10, C-12, C-15, C-16 Truck Engines Reference Material
D Series Excavator Monitoring System Performance Mode
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.