844H Wheel Dozer Machine Systems Caterpillar


Hydraulic Tank (Implement, Brake) - Remove

Usage:

844H BTW

拆卸步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     138-7573     连杆支架     2    


注意

在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。

按照当地法规和指令处置所有液体。


注: 液压油箱(机具和制动器)位于机器右侧。

  1. 从液压油箱将机油排入适当的容器以便保存或适合的废弃处理。 请参阅操作和保养手册, "液压系统油(机具和制动器)- 更换"。



    图 1g01239638

  1. 断开软管组件 (2) 和 (3) 。 拆下螺栓 (1) 和 (4) 以及垫圈。



    图 2g01239640

  1. 拆下软管组件 (9) 。 断开线束组件 (7) 。 拆下开关组件 (6) 。 断开软管组件 (5) 和 (8) 。



    图 3g01239840

  1. 需要两个人来拆下面板组件 (4) 。 面板组件 (10) 的重量约为 27 kg (60 lb)。 打开检修门 (11) 。



    图 4g01239647

  1. 断开软管组件 (12) 。



    图 5g01239648



    图 6g01239821

  1. 将工具 (A) 和适当的起吊设备连接到液压油箱组件 (13) 上。 拆卸螺栓 (14) 和垫圈。 拆下液压油箱组件 (13) 。 液压油箱组件 (13) 的重量为 283 kg (625 lb)。

Caterpillar Information System:

D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Lift Cylinder (Bulldozer)
993K Wheel Loader Engine Oil Sample - Obtain
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Lubrication Distribution Valve
993K Wheel Loader Engine Oil Level - Check
990H Wheel Loader Machine Systems Pilot Valve - Assemble
990H Wheel Loader Machine Systems Pilot Valve - Disassemble
990H Wheel Loader Machine Systems Expansion Tank (Air) (European Market) - Install
990H Wheel Loader Machine Systems Expansion Tank (Air) (European Market) - Remove
Custom Product Support Literature for the 980H Wheel Loaders that have a Steel Mill Arrangement{7000} Custom Product Support Literature for the 980H Wheel Loaders that have a Steel Mill Arrangement{7000}
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Angle Cylinder (Bulldozer)
525C, 535C and 545C Wheel Skidders Machine Monitor System Features
2006/02/13 Barrel Adapter Allows Technician to Attach Filter Unit to Barrel {0645, 0680}
2006/02/13 New Hood Hinge Pins for Medium Wheel Loaders {7251}
Salvage Case Assembly and Idler Shaft in Transmission Transfer Gear Groups for 621B, 623B, 627, 627B, 641, 641B, 650B, 651B, 651E, 657, 657B, 657E, 657G, 660B, 666, and 666B Tractor-Scrapers{3030, 3159} Salvage Case Assembly and Idler Shaft in Transmission Transfer Gear Groups for 621B, 623B, 627, 627B, 641, 641B, 650B, 651B, 651E, 657, 657B, 657E, 657G, 660B, 666, and 666B Tractor-Scrapers{3030, 3159}
2006/02/13 Change to Fan Shroud Increases Clearance {1353, 7272}
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Bulldozer Lift)
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt)
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Ripper Lift)
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Ripper Tip)
525C, 535C and 545C Wheel Skidders Machine Monitor System Location of Electrical Components
844H Wheel Dozer and 990H Wheel Loader Engine Supplement Refrigerant Condenser - Remove and Install
Compatibility Between Computerized Monitoring System and Communication Adapter{7451, 7490} Compatibility Between Computerized Monitoring System and Communication Adapter{7451, 7490}
Procedure for MVP Field Installation{7620} Procedure for MVP Field Installation{7620}
988H and 992K Wheel Loaders and 844H and 854K Wheel Dozers Automatic Lubrication System (Electrical Actuated System) Automatic Lubrication System - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.