Engine Oil Level - Check
Show/hide table
 |
|
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
Show/hide table
| NOTICE |
|---|
|
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage. |
Show/hide table
| |
| Illustration 1 | g01268005 |
- The engine oil level gauge (2) is located below the oil filler tube (1) inside the access door on the left side of the machine. Open the access door.
Show/hide table
Illustration 2 g01239233 - Check the engine oil level gauge while the engine is stopped. Maintain the engine oil level in the shaded area (A) of the engine oil level gauge.
- If necessary, add oil through the filler tube.
Caterpillar Information System:
990H Wheel Loader Machine Systems Pilot Valve - Assemble
990H Wheel Loader Machine Systems Pilot Valve - Disassemble
990H Wheel Loader Machine Systems Expansion Tank (Air) (European Market) - Install
990H Wheel Loader Machine Systems Expansion Tank (Air) (European Market) - Remove
Custom Product Support Literature for the 980H Wheel Loaders that have a Steel Mill Arrangement{7000} Custom Product Support Literature for the 980H Wheel Loaders that have a Steel Mill Arrangement{7000}
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Angle Cylinder (Bulldozer)
525C, 535C and 545C Wheel Skidders Machine Monitor System Features
2006/02/13 Barrel Adapter Allows Technician to Attach Filter Unit to Barrel {0645, 0680}
525C, 535C and 545C Wheel Skidders Machine Monitor System Component Description
990H Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Install
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Throttle Position Sensor Circuit - Test
993K Wheel Loader Engine Oil and Filter - Change
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Lubrication Distribution Valve
993K Wheel Loader Engine Oil Sample - Obtain
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Lift Cylinder (Bulldozer)
844H Wheel Dozer Machine Systems Hydraulic Tank (Implement, Brake) - Remove
2006/02/13 New Hood Hinge Pins for Medium Wheel Loaders {7251}
Salvage Case Assembly and Idler Shaft in Transmission Transfer Gear Groups for 621B, 623B, 627, 627B, 641, 641B, 650B, 651B, 651E, 657, 657B, 657E, 657G, 660B, 666, and 666B Tractor-Scrapers{3030, 3159} Salvage Case Assembly and Idler Shaft in Transmission Transfer Gear Groups for 621B, 623B, 627, 627B, 641, 641B, 650B, 651B, 651E, 657, 657B, 657E, 657G, 660B, 666, and 666B Tractor-Scrapers{3030, 3159}
2006/02/13 Change to Fan Shroud Increases Clearance {1353, 7272}
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Bulldozer Lift)
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt)
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Ripper Lift)
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Ripper Tip)
525C, 535C and 545C Wheel Skidders Machine Monitor System Location of Electrical Components