Expansion Tank (Air) (European Market) - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 138-7575 | 连杆支架 | 1 |
| B | 138-7573 | 连杆支架 | 2 |
开始:
- 释放液压系统压力。 请参阅拆解和组装, "液压系统压力 - 释放"。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
注: 清洁度是一项重要的因素。 拆解步骤开始之前，应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
注: 为便于安装，在所有管路、所有软管、所有线束组件及所有管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。
- 拆下螺栓 (1) 。 断开线束组件 (2) 。 需要两个人拆卸扶手组件 (3) 。 扶手组件 (3) 的重量约为 31 kg (70 lb)。 从两侧拆下螺栓 (4) 。 拆下扶手组件 (3) 。
Show/hide table
 | |
| 图 1 | g01239423 |
- 断开软管组件 (5) 。
Show/hide table
 | |
| 图 2 | g01239447 |
Show/hide table
 | |
| 图 3 | g01239474 |
注: 为清楚可见，拆下面板。
- 从面板组件 (7) 的每侧拆下螺栓 (6) 。 将工具 (A) 和适当的起吊设备连接到面板组件 (7) 上。 面板组件 (7) 的重量约为 117 kg (260 lb)。 拆下面板组件 (7) 。
Show/hide table
 | |
| 图 4 | g01239446 |
- 将工具 (B) 和适当的起吊设备连接到膨胀箱 (8) 上。 膨胀箱 (8) 的重量约为 68 kg (150 lb)。 拆下螺栓 (9) 。 拆卸膨胀箱 (8) 。
Show/hide table
 | |
| 图 5 | g01239448 |
Caterpillar Information System:
Custom Product Support Literature for the 980H Wheel Loaders that have a Steel Mill Arrangement{7000} Custom Product Support Literature for the 980H Wheel Loaders that have a Steel Mill Arrangement{7000}
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Angle Cylinder (Bulldozer)
525C, 535C and 545C Wheel Skidders Machine Monitor System Features
2006/02/13 Barrel Adapter Allows Technician to Attach Filter Unit to Barrel {0645, 0680}
525C, 535C and 545C Wheel Skidders Machine Monitor System Component Description
990H Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Install
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Throttle Position Sensor Circuit - Test
993K Wheel Loader Engine Oil and Filter - Change
2006/03/20 Three Seal Installers Available for Servicing Hand Metering Units {0732, 4312}
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Engine Shutdown Switch Circuit - Test
844H Wheel Dozer and 990H Wheel Loader Power Train Torque Converter (Lockup) - Install
844H Wheel Dozer and 990H Wheel Loader Power Train Torque Converter (Lockup) - Remove
990H Wheel Loader Machine Systems Expansion Tank (Air) (European Market) - Install
990H Wheel Loader Machine Systems Pilot Valve - Disassemble
990H Wheel Loader Machine Systems Pilot Valve - Assemble
993K Wheel Loader Engine Oil Level - Check
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Lubrication Distribution Valve
993K Wheel Loader Engine Oil Sample - Obtain
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Lift Cylinder (Bulldozer)
844H Wheel Dozer Machine Systems Hydraulic Tank (Implement, Brake) - Remove
2006/02/13 New Hood Hinge Pins for Medium Wheel Loaders {7251}
Salvage Case Assembly and Idler Shaft in Transmission Transfer Gear Groups for 621B, 623B, 627, 627B, 641, 641B, 650B, 651B, 651E, 657, 657B, 657E, 657G, 660B, 666, and 666B Tractor-Scrapers{3030, 3159} Salvage Case Assembly and Idler Shaft in Transmission Transfer Gear Groups for 621B, 623B, 627, 627B, 641, 641B, 650B, 651B, 651E, 657, 657B, 657E, 657G, 660B, 666, and 666B Tractor-Scrapers{3030, 3159}
2006/02/13 Change to Fan Shroud Increases Clearance {1353, 7272}
D7R Series 2 Track-Type Tractor Hydraulic System Control Valve (Bulldozer Lift)