SR5 Electric Power Generation Caterpillar


Generator Set - Test

Usage:

SR5 G1E

表 1
所需工具    
零件号     工具     数量    
237-5130     数字式万用表     1    
    12V 蓄电池     1    

发电机组功能测试是一个简化的试验,执行该试验可确定发电机是否正常运转。 最终测试应在发电机带有负载时,在整个发电机组上进行。 发电机组功能测试将确定是否能生成相电压。 发电机组功能测试还将确定相电压是否平衡。 此外,此测试将确定相电压是否随发动机转速而变化。

发电机组功能测试包括下列步骤:

  1. 从电压调节器上断开导线 F1 和 F2。 断开发电机负载。

  1. 将 12 VDC 机动车蓄电池连接到导线 F1+ 和 F2-。


    注意

    不要以高于半额定转速的转速来运转发电机组。

    在这些测试情况下,更高的转速会造成系统损坏。


    注: 不要让发电机输出电压超过铭牌额定值。

  1. 以半额定转速操作发电机组。

  1. 测量以下端子之间的交流电压。 记录结果。

    表 2
    端子间的交流电压    
    发电机组转速     端子     交流电压    
    半额定转速     "T1" 和 "T2"        
    "T1" 和 "T3"    
    "T2" 和 "T3"    
    将发电机组转速降低 10%。     "T1" 和 "T2"        
    "T1" 和 "T3"    
    "T2" 和 "T3"    
    将发电机组转速提高 10%。
    不要超过半额定转速。    
    "T1" 和 "T2"        
    "T1" 和 "T3"    
    "T2" 和 "T3"    

  1. 在将发电机组转速先降低再提高 10% 的同时,监视步骤 4 中所示的对应电压。 不要超过半额定转速。

  1. 步骤 4 中测得的电压应至少为 85 VAC。 当发电机组转速提高 10% 时,步骤 5 的电压应显示增加了 10%。 当发电机组转速降低 10% 时,步骤 5 的电压应显示下降了 10%。

注: 如果发动机转速无法调整到半额定转速,可使用 6 VDC 电池。 可在步骤 2 中将 6 VDC 电池连接到导线 F1+ 和 F2-。

Caterpillar Information System:

SR5 Electric Power Generation Troubleshooting
SR5 Electric Power Generation Service Tools
SR5 Electric Power Generation General Information
SR5 Electric Power Generation Glossary
SR5 Electric Power Generation Lead Connections
SR5 Electric Power Generation Generator Operation
SR5 Electric Power Generation Component Descriptions
SR5 Electric Power Generation General Information
C6.6 Generator Set 5 Volt Sensor Supply Circuit - Test
C6.6 Generator Set E362 Engine Overspeed
C6.6 Generator Set CID 0261 FMI 11
Application and Installation Guide for Oil/Gas Well Servicing Transmissions and Oil/Gas Well Servicing Power Systems (Mechanical Guide){1408, 1435, 3030, 3101, 7553} Application and Installation Guide for Oil/Gas Well Servicing Transmissions and Oil/Gas Well Servicing Power Systems (Mechanical Guide){1408, 1435, 3030, 3101, 7553}
3126B and 3126E Truck Engines Front Housing and Covers
336E Excavator Machine System Specifications Stick Cylinder Lines
C9 Generator Set Engine Radiator Top Tank - Remove and Install
Electrical Application and Installation Guide for Petroleum Transmissions and Petroleum Power Train Packages{1408, 1435, 3030, 7490, 7553} Electrical Application and Installation Guide for Petroleum Transmissions and Petroleum Power Train Packages{1408, 1435, 3030, 7490, 7553}
C9 Generator Set Engine Radiator Core - Remove and Install
SR5 Electric Power Generation Varistor - Test
SR5 Electric Power Generation Rotating Rectifier - Test
C9 Generator Set Engine Fan - Remove and Install
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714} Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
C9 On-highway Engines Model View Illustrations
3126B and 3126E Truck Engines Gear Group (Front)
SR5 Electric Power Generation Winding - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.