3408E and 3412E Engines for Caterpillar Built Machines Caterpillar


Cylinder Liner

Usage:

769C 01X



Ilustrasi 1g02716964

Tabel 1
Spesifikasi untuk Liner Blok Silinder 197-9322    
Item     Jml     Suku Cadang     Deskripsi Spesifikasi    
A     -     -     Lubang liner silinder yang baru adalah
137,185 ± 0,025 mm (5,4010 ± 0,0010 in).    
B     -     -     Dimensi untuk flensa (1) adalah
8,89 ± 0,02 mm (0,350 ± 0,001 in).    
-     -     -     Gunakan prosedur berikut untuk memasang liner silinder:
1. Berikan sabun cair pada permukaan lubang liner blok silinder dan seal karet yang berada di ujung bawah liner silinder.
2. Rendam pita pengisian (2) sepenuhnya dalam oli engine yang bersih.
3. Segera pasang pita pengisian di alur yang berada di bawah flensa.
4. Pasang liner silinder ke blok silinder sebelum pita pengisian mengembang.    

Caterpillar Information System:

324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Lower
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble
C32 Petroleum Engines Fuel Pressure Sensor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Assemble
C32 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
C32 Petroleum Engines Coolant Temperature Sensor - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Seat - Remove and Install
C32 Petroleum Engines Crankshaft Position Sensor - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Travel) - Install
3512C Engine for 785D Off-Highway Truck/Tractors Engine Design
3512C and 3516C Marine Engines Engine Design
C32 Petroleum Engines Camshaft Position Sensor - Remove and Install
C32 Petroleum Engines Fuel Temperature Sensor - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Actuator Motor (Air Distributor) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Fuel Tank - Remove
345C MHPU Mobile Hydraulic Power Unit Machine Systems Fuel Tank - Install
2005/10/03 Starting the Engine with Jumper Cables on Machines with an Electric Starter {1000, 7000}
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
C1.5 and C2.2 Generator Set Engines Engine Enclosure Group - Remove and Install
320E and 323E Excavators Machine System Specifications Solenoid Valve (Quick Coupler)
C32 Petroleum Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C32 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
C175 Generator Set Engines Exhaust Elbow - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System Speed Sensor (Transmission Output) - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.