R1600G Load Haul Dump Power Train Caterpillar


Final Drive Planetary Carrier - Assemble

Usage:

R1600G 9PP

组装步骤

  1. 清洁并检查所有零件。 如果任何零件磨损或损坏,则应使用 Caterpillar 新件进行更换。



    图 1g01205643

  1. 将轴承 (7) 、垫片 (8) 和轴承 (9) 安装到轴 (4) 上。



    图 2g01205644

  1. 将垫圈 (5) 、垫圈 (6) 、垫圈 (10) 、垫圈 (11) 和齿轮 (4) 安装到行星齿轮架 (2) 上。



    图 3g00468043

  1. 将挡圈 (3) 安装到行星轴 (1) 上。



    图 4g01205640

  1. 将三个行星轴 (1) 安装到行星齿轮架 (2) 上。

End By: 安装终传动。 请参阅 拆解和组装, "终传动和车轮 - 安装"。

Caterpillar Information System:

R1600G Load Haul Dump Power Train Final Drive Planetary Carrier - Disassemble
R1300G Series II Load Haul Dump Power Train Output Drive
R1300G Series II Load Haul Dump Power Train Transmission Hydraulic Control
R1300G Series II Load Haul Dump Power Train Temperature Sensor (Transmission Oil)
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
777F Off-Highway Truck Rear Axle A-Frame Bearing - Lubricate
793D Off-Highway Truck Air System and Brakes Parking and Secondary Brake Release System Leakage - Check
3516B Off-Highway Trucks Pulse Width Modulated Sensor
D7R Series 2 Track-Type Tractor Power Train Transmission Mounting
740 Articulated Truck, 768C, 769C, 769D, 772B, 773B, 773D, 773E, 773F, 776, 776B, 776C, 776D, 777, 777B, 777C, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C and 793D Off-Highway Trucks and 771C, 771D, 775B, 775 Pressure Switch (Air)
966H Wheel Loader and 972H Wheel Loader Power Train Transmission Speed for Reverse Directional Shift - Program
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Vital Information Management System (VIMS)
R1300G Series II Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Disassemble
R1300G Series II Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Remove
D7R Series 2 Track-Type Tractor Power Train Bevel and Transfer Gears
CB-534D, CB-534D Series XW and CB-564D Vibratory Compactors Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Configure
M325D MH Material Handler Air Conditioning and Heating Control
793D Off-Highway Truck Air System and Brakes Relief Valve (Brake Oil Cooler) - Test and Adjust
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
AP-1000D and BG-260D Asphalt Pavers Machine Systems Electric Motor (Screed Burner Fuel Pump) - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Install
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 1400 - FMI 06
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.