Flywheel - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | - | Guide Stud 5/8 - 18 UNF by 11 inch |
2 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove two bolts (1) from flywheel (2). Install Tooling (A) in the crankshaft.
Show/hide table
Illustration 2 g01203092 - Remove the remaining bolts. Slide flywheel (2) from the engine on Tooling (A).
- Attach a suitable lifting device to flywheel (2). The weight of flywheel (2) is approximately
53 kg (117 lb) . - Use a hammer and a punch in order to remove ring gear (3) from flywheel (2).
Show/hide table
Illustration 1 | g01203091 |
Caterpillar Information System:
3412 Generator Set Engines Valve Mechanism Cover
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft and Push Rods - Remove
C175 Generator Set Engines Crankcase Breather - Remove and Install
G3500 A3 Engines System Overview
C27 and C32 Generator Set Engines CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C27 and C32 Generator Set Engines CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines Exhaust Manifold
C27 and C32 Generator Set Engines Excessive Black Smoke
C15-XQ400 Rental Generator Set Additional Messages
C6.6 Generator Set Injector Data Incorrect - Test
C32 Petroleum Engines Water Temperature Regulator - Remove and Install
2005/11/28 The 6V-8633 Connector Has Changed {5057, 7553}
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft and Push Rods - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Camshaft Bearings - Remove
3412 Generator Set Engines Turbocharger Oil Lines - Twin Turbocharger Configuration
3412 Generator Set Engines Turbocharger Oil Lines - Series Turbocharger Configuration
3412 Generator Set Engines Turbocharger Oil Lines - Single Turbocharger Configuration
Mechanical Application and Installation Guide for the TH48-E80 Petroleum Transmission{3030, 3101} Mechanical Application and Installation Guide for the TH48-E80 Petroleum Transmission{3030, 3101}
Caterpillar On-Highway Diesel Engine Fluids Recommendations S·O·S Services Coolant Analysis
Cat Commercial Diesel Engine Fluids Recommendations S·O·S Services Oil Analysis
C32 Petroleum Engines Flywheel - Install
C9 Generator Set Engines Injector Solenoid Circuit - Test
C175-16 and C175-20 Engines for Caterpillar Built Machines Camshaft Bearings - Install
C32 Petroleum Engines Flywheel Housing - Remove and Install