3412 Generator Set Engines Caterpillar


Valve Mechanism Cover

Usage:

D10N 2YD



图 1g01393882



图 2g01395027

摇臂盖底座的拧紧顺序




图 3g01395018

气门机构盖的拧紧顺序

(1) 按所示数字顺序拧紧摇臂盖底座的螺栓至以下扭矩。 ... 14 ± 4 N·m (125 ± 35 lb in)

(2) 按所示数字顺序拧紧摇臂盖底座的螺栓至以下扭矩。 ... 14 ± 4 N·m (125 ± 35 lb in)

注: 安装前,先在密封 (5) 的两端涂抹 3S-6252 密封剂 。

(3) 将气门机构盖的密封切至以下长度。 ... 1409.7 ± 6.4 mm (55.50 ± 0.25 in)

(4) 将摇臂盖底座的密封切至以下长度。 ... 1625.6 ± 6.4 mm (64.00 ± 0.25 in)

Caterpillar Information System:

C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft and Push Rods - Remove
C175 Generator Set Engines Crankcase Breather - Remove and Install
G3500 A3 Engines System Overview
C27 and C32 Generator Set Engines CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C27 and C32 Generator Set Engines CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines Exhaust Manifold
C27 and C32 Generator Set Engines Excessive Black Smoke
C15-XQ400 Rental Generator Set Additional Messages
C6.6 Generator Set Injector Data Incorrect - Test
C32 Petroleum Engines Water Temperature Regulator - Remove and Install
2005/11/28 The 6V-8633 Connector Has Changed {5057, 7553}
C32 Petroleum Engines Water Pump - Install
C32 Petroleum Engines Flywheel - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft and Push Rods - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Camshaft Bearings - Remove
3412 Generator Set Engines Turbocharger Oil Lines - Twin Turbocharger Configuration
3412 Generator Set Engines Turbocharger Oil Lines - Series Turbocharger Configuration
3412 Generator Set Engines Turbocharger Oil Lines - Single Turbocharger Configuration
Mechanical Application and Installation Guide for the TH48-E80 Petroleum Transmission{3030, 3101} Mechanical Application and Installation Guide for the TH48-E80 Petroleum Transmission{3030, 3101}
Caterpillar On-Highway Diesel Engine Fluids Recommendations S·O·S Services Coolant Analysis
Cat Commercial Diesel Engine Fluids Recommendations S·O·S Services Oil Analysis
C32 Petroleum Engines Flywheel - Install
C9 Generator Set Engines Injector Solenoid Circuit - Test
C175-16 and C175-20 Engines for Caterpillar Built Machines Camshaft Bearings - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.