Water Pump - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position water pump (7) in the front housing.
- Install nuts (8) and bolts (9).
Show/hide table
Illustration 2 g01202462 - Position cover (3) on the water pump.
- Install bolt (4), washer (5), and spacer (6).
- Install bolts (1) and (2).
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 | g01202496 |
Caterpillar Information System:
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Disassemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Bucket - Install
C15 Generator Set Engines Can Not Reach Top Engine RPM
3600 Distillate Fuel Engines Turbocharger - Inspect - Napier Turbocharger - If Equipped
C32 Petroleum Engines Water Pump - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Roller - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Roller - Remove
3412 Generator Set Engines Valve Rocker Arms, Lifters, and Bridges
C175-16 and C175-20 Engines for Caterpillar Built Machines Cylinder Head - Remove
3412 Generator Set Engines Valve Rocker Arms, Lifters, and Bridges
C15 Generator Set Engines Engine Will Not Crank
3412 Generator Set Engines Automatic Timing Advance Unit
2005/11/28 The 6V-8633 Connector Has Changed {5057, 7553}
C32 Petroleum Engines Water Temperature Regulator - Remove and Install
C6.6 Generator Set Injector Data Incorrect - Test
C15-XQ400 Rental Generator Set Additional Messages
C27 and C32 Generator Set Engines Excessive Black Smoke
C11 and C13 Engines Exhaust Manifold
C27 and C32 Generator Set Engines CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C27 and C32 Generator Set Engines CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
G3500 A3 Engines System Overview
C175 Generator Set Engines Crankcase Breather - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft and Push Rods - Remove
3412 Generator Set Engines Valve Mechanism Cover