Water Pump - Remove
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 g01202462 - Remove bolt (4), washer (5), and spacer (6).
- Remove bolts (1) and (2).
- Remove cover (3).
Show/hide table
Illustration 2 g01202496 - Remove bolts (9) and nuts (8).
- Remove water pump (7).
Caterpillar Information System:
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Roller - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Roller - Remove
3412 Generator Set Engines Valve Rocker Arms, Lifters, and Bridges
C175-16 and C175-20 Engines for Caterpillar Built Machines Cylinder Head - Remove
3412 Generator Set Engines Valve Rocker Arms, Lifters, and Bridges
C15 Generator Set Engines Engine Will Not Crank
3412 Generator Set Engines Automatic Timing Advance Unit
3412 Generator Set Engines Automatic Timing Advance Unit
3412 Generator Set Engines Automatic Timing Advance Unit
C-12 Generator Set Engine Noise Coming from Cylinder
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Multiposition Switch Setup
C9 Urban Transit Bus Engine Low Power/Poor or No Response to Throttle
3600 Distillate Fuel Engines Turbocharger - Inspect - Napier Turbocharger - If Equipped
C15 Generator Set Engines Can Not Reach Top Engine RPM
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Bucket - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Disassemble
C32 Petroleum Engines Water Pump - Install
2005/11/28 The 6V-8633 Connector Has Changed {5057, 7553}
C32 Petroleum Engines Water Temperature Regulator - Remove and Install
C6.6 Generator Set Injector Data Incorrect - Test
C15-XQ400 Rental Generator Set Additional Messages
C27 and C32 Generator Set Engines Excessive Black Smoke
C11 and C13 Engines Exhaust Manifold
C27 and C32 Generator Set Engines CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high