Track Roller - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 8S-7611 | 管组件 | 2 |
| 8S-7615 | 销 | 2 | |
| 8S-7640 | 支座总成 | 2 | |
| B | 183-4799 | 履带支重轮起重叉车 | 1 |
注: 机器两侧各有一个履带导向器。 遵循以下步骤以安装带有履带导向器的履带支重轮。
- 安装履带支重轮、履带导向器和岩石防护罩前，确保履带支重轮、履带导向器、岩石防护罩和底盘机架组件的配合面清洁且无污垢和碎屑。
- 使用工具 (B) 和适当的起吊设备将履带支重轮 (2) 置于底盘机架组件上适当的位置。 履带支重轮 (2) 的重量约为 91 kg (200 lb)。 确保履带支重轮中的注油塞朝向底盘机架组件的外侧。 安装将履带支重轮固定在相应位置的四个螺栓。
Show/hide table
 | |
| 图 1 | g00489838 |
- 使用工具 (B) 将履带导向器 (1) 置于底盘机架组件上合适的位置。 安装固定防护装置的螺栓。
Show/hide table
 | |
| 图 2 | g00489833 |
- 如果配备，安装摇动防护装置。
Show/hide table
 | |
| 图 3 | g00489835 |
- 将机器降低至地面并拧紧履带之前，请通过手动转动履带支重轮来确保所有履带支重轮能够平滑转动。
- 将机器升起脱离工具 (A) 。 从机器上拆下工具 (A) 。 把机器降低到地面上。
Show/hide table
 | |
| 图 4 | g00489826 |
- 张紧履带的张力。 有关正确的步骤，请参阅操作和保养手册, "履带调整 - 调整"。
Caterpillar Information System:
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Roller - Remove
3412 Generator Set Engines Valve Rocker Arms, Lifters, and Bridges
C175-16 and C175-20 Engines for Caterpillar Built Machines Cylinder Head - Remove
3412 Generator Set Engines Valve Rocker Arms, Lifters, and Bridges
C15 Generator Set Engines Engine Will Not Crank
3412 Generator Set Engines Automatic Timing Advance Unit
3412 Generator Set Engines Automatic Timing Advance Unit
3412 Generator Set Engines Automatic Timing Advance Unit
C-12 Generator Set Engine Noise Coming from Cylinder
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Multiposition Switch Setup
C9 Urban Transit Bus Engine Low Power/Poor or No Response to Throttle
C9-XQ300 Rental Generator Set Circuit Breakers - Reset
C32 Petroleum Engines Water Pump - Remove
3600 Distillate Fuel Engines Turbocharger - Inspect - Napier Turbocharger - If Equipped
C15 Generator Set Engines Can Not Reach Top Engine RPM
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Bucket - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Disassemble
C32 Petroleum Engines Water Pump - Install
2005/11/28 The 6V-8633 Connector Has Changed {5057, 7553}
C32 Petroleum Engines Water Temperature Regulator - Remove and Install
C6.6 Generator Set Injector Data Incorrect - Test
C15-XQ400 Rental Generator Set Additional Messages
C27 and C32 Generator Set Engines Excessive Black Smoke
C11 and C13 Engines Exhaust Manifold