Selector Valve (Alternate Pattern Control) - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | FT-2674 | 真空舱 | 1 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将选档器阀 (5) 放置到位，然后安装螺栓 (4) 。
Show/hide table
 | |
| 图 1 | g01201672 |
- 连接软管组件 (3) 和软管组件 (2) 。
- 关闭左前检修门 (1) 。
Show/hide table
 | |
| 图 2 | g01201661 |
- 从液压油箱上卸下工具 (A) 。
Show/hide table
 | |
| 图 3 | g01196137 |
- 检查液压油箱的油位。 请参阅操作和保养手册, "液压系统油位 - 检查"。
Caterpillar Information System:
C1.5 and C2.2 Generator Set Engines Camshaft - Install
Modifying the Air Shutoff Valve{1078, 1078} Modifying the Air Shutoff Valve{1078, 1078}
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Cover - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Bucket - Remove
C1.5 and C2.2 Generator Set Engines Camshaft - Remove
2005/12/19 New Air Shutoff Valves are Now Used {1078}
G3600 Engines Engine Protective Device Connections - Inspect
C15 Generator Set Engines Emergency Stop Switch Circuit - Test
C15 Generator Set Engines Diagnostic Code Cross Reference
C15 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C1.5 and C2.2 Generator Set Engines Cylinder Head - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Adjuster - Disassemble
C1.5 and C2.2 Generator Set Engines Pistons and Connecting Rods - Remove
Hydraulic Cylinder Seal Failure Analysis {7555, 7562} Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Connect
Start-up Procedure after a System Generated Shutdown{1000} Start-up Procedure after a System Generated Shutdown{1000}
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Adjuster - Assemble
C15 Generator Set Engines CAN Data Link Circuit - Test
3412 Generator Set Engines Fuel Injection Pump Housing
C1.5 and C2.2 Generator Set Engines Pistons and Connecting Rods - Install
C15 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
3412 Generator Set Engines Fuel Injection Pump
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685} Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}