C32 Petroleum Engines Caterpillar


Engine Oil Cooler - Install

Usage:

C32 B2C

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01201299

  1. Position engine oil cooler (1) and install bolts (5) and (6).

  2. Position bonnet (2). Install bolts (3) and (4).

  3. Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".

End By:

  1. Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".

Caterpillar Information System:

C15 and C18 Industrial Engines Engine Oil Pan
C1.5 and C2.2 Generator Set Engines Cylinder Head - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Sprocket - Remove and Install
C175 Generator Set Engines Engine Oil Screen - Remove and Install
C1.5 and C2.2 Generator Set Engines Rocker Shaft and Pushrod - Install
C1.5 and C2.2 Generator Set Engines Rocker Shaft - Assemble
C1.5 and C2.2 Generator Set Engines Rocker Shaft - Disassemble
C15 Generator Set Engines Sensors and Electrical Connectors
3600 Distillate Fuel Engines Product Storage
2005/09/12 Improved Seal on Fuel Filter {1261}
2005/09/01 Improved Seal on Fuel Filter {1261}
C15 Petroleum Generator Set Engines Vibration Damper - Check
2005/09/12 Make Sure to Clean the Shaft for the Engine Oil Scavenge Pump's Gear {1312}
C15 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
2005/09/12 Remanufactured Rocker Arm has been Changed {1123}
C1.5 and C2.2 Generator Set Engines Cylinder Head - Install
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C15 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
C15 Generator Set Engines Diagnostic Code Cross Reference
C15 Generator Set Engines Emergency Stop Switch Circuit - Test
G3600 Engines Engine Protective Device Connections - Inspect
2005/12/19 New Air Shutoff Valves are Now Used {1078}
C1.5 and C2.2 Generator Set Engines Camshaft - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Bucket - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.