Improved Seal on Fuel Filter {1261}
- On-Highway Engines:
- 3116 (S/N: 7HJ1-UP; CSM1-UP; 5RM1-UP; 2FR1-UP; 7HS1-UP; 7AG1-UP; 3RJ1-UP)
- Commercial and Truck Engines:
- C7 TRUCK/BUS (S/N: YPG1-UP)
- 3126 (S/N: 4ES1-UP; 6RW1-UP; 8HW1-UP; 7LZ1-UP; 1WM1-UP; 1BW1-UP)
- 3126B (S/N: 7JZ1-UP; BKD1-UP; 1AJ1-UP; 6PZ1-UP; 8SZ1-UP; 8YL1-UP; BES1-UP)
- 3176 (S/N: 5XN1-UP; 2YG1-UP)
- 3176B (S/N: 3LZ1-UP; 9CK1-UP)
- 3208 (S/N: 5CD1-UP; 62W1-UP; 99R1-UP; 02Z1-UP)
- 3406E (S/N: 4AS1-UP; 5DS1-UP)
- C-10 (S/N: 3CS1-UP; 2PN1-UP; AKB1-UP; MBJ1-UP)
- C-12 (S/N: 1YN1-UP; TME1-UP; MBL1-UP; 9SM1-UP; ALS1-UP; CPD1-UP; 2KS1-UP)
- C-15 (S/N: 9NZ1-UP; MBN1-UP; 6NZ1-UP)
- C-16 (S/N: W1A1-UP; 7CZ1-UP)
- C-18 (S/N: MEP1-UP; MDP1-UP)
- C15 (S/N: MXS1-UP; BXS1-UP)
- C7 (S/N: FML1-UP; KAL1-UP; FMM1-UP; SAP1-UP)
- C9 (S/N: MTB1-UP; 9DG1-UP; CKP1-UP)
- 3306C (S/N: 9TL1-UP)
- C11 (S/N: KCA1-UP)
- C13 (S/N: KCB1-UP)
- 3116 ATAAC (S/N: 7JL1-UP)
- 3116 T (S/N: 9YN1-UP)
- 3208 DI FORD GMC GRAPH IHC LISTS NA WHITE (S/N: 51Z1-UP)
- 3306B (S/N: 63Z1-UP)
- 3306C ATAAC DI TA (S/N: 7RJ1-UP)
- 3406 DI FORD FRTLR IHC PACCR T (S/N: 92U1-UP)
- 3408C (S/N: 9ER1-UP)
- 3456 (S/N: 9BZ1-UP)
- 3306 (S/N: 76R1-UP)
- 3406 (S/N: 3ZJ1-UP)
- 3126E (S/N: HEP1-UP)
- 3126E (S/N: G3E1-UP; LEF1-UP; CRP1-UP; 9SZ1-UP)
Description of Change: The engines that are listed above contain a new seal on the fuel filter.
Adaptable To:
Show/hide table
Illustration 1 | g01201381 |
Old Seal |
The old seal (A) has been redesigned on the following fuel filters. 1R-0750 Fuel Filter, 1R-0751 Fuel Filter, 1R-0749 Fuel Filter, and 1R-0753 Fuel Filter. The seal on the fuel filter was redesigned in order to provide a better seal for higher operating pressures.
Show/hide table
Illustration 2 | g01201402 |
New Seal |
The new seal (B) on the fuel filter will withstand higher operating pressures than the old seal.
Caterpillar Information System:
C15 Petroleum Generator Set Engines Vibration Damper - Check
C175 Generator Set Engines Water Pump - Install
C1.5 and C2.2 Generator Set Engines Rocker Shaft and Pushrod - Remove
2007/07/30 Improved Seal on Fuel Filter {1261}
C175-16 and C175-20 Locomotive Engines Water Pump - Remove
C15 Petroleum Generator Set Engines Fuel System - Prime
C15 Petroleum Generator Set Engines Cooling System
C15 Petroleum Generator Set Engines Air Inlet and Exhaust System
C15 Petroleum Generator Set Engines Fuel System
C15 Petroleum Generator Set Engines Electronic Control System Components
C15 Petroleum Generator Set Engines General Information
C4.4 Industrial Engine Crankshaft Position Sensor
2005/09/12 Improved Seal on Fuel Filter {1261}
3600 Distillate Fuel Engines Product Storage
C15 Generator Set Engines Sensors and Electrical Connectors
C1.5 and C2.2 Generator Set Engines Rocker Shaft - Disassemble
C1.5 and C2.2 Generator Set Engines Rocker Shaft - Assemble
C1.5 and C2.2 Generator Set Engines Rocker Shaft and Pushrod - Install
C175 Generator Set Engines Engine Oil Screen - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Sprocket - Remove and Install
C1.5 and C2.2 Generator Set Engines Cylinder Head - Remove
C15 and C18 Industrial Engines Engine Oil Pan
C32 Petroleum Engines Engine Oil Cooler - Install
2005/09/12 Make Sure to Clean the Shaft for the Engine Oil Scavenge Pump's Gear {1312}