C175 Generator Set Engines Caterpillar


Engine Oil Cooler - Install

Usage:

C175-20 BXR

安装步骤


注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。





    图 1g01199773

  1. 将适当的起吊设备连接到发动机机油冷却器 (1) 上。 发动机机油冷却器 (1) 的重量约为 150 kg (330 lb)。



    图 2g01926635

  1. 定位发动机机油冷却器 (1) 。 安装螺栓 (13) 。 对另一侧重复此操作。



    图 3g01926429



    图 4g01926428

  1. 连接管组件 (10) 。 安装螺栓 (11) 。 清洁连接器 (8) 上的接头和密封唇。 管彼此相距 20 mm (1 in)。 将接头 (8) 置于间隙的中间。 润滑螺栓并均匀地拧紧各螺栓。 拧紧螺栓到扭矩 12 ± 1 N·m (106 ± 9 lb in)。 不得重复拧紧接头 (8) 上的螺栓。 连接管组件 (12) 。 安装螺栓 (9) 。

  1. 定位卡箍 (7) ,然后安装螺栓 (6) 。



    图 5g01199583

  1. 连接管组件 (4) 。 安装螺栓 (5) 。 连接管组件 (2) 。 安装螺栓 (3) 。

  1. 向冷却系统加注冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.