Fuel Priming Pump - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (3) and washers (2).
- Remove fuel priming pump (4) and the gasket from fuel filter base (1).
Show/hide table
Illustration 1 | g01199587 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position a new gasket and fuel priming pump (4) on fuel filter base (1).
- Install bolts (3) and washers (2).
- Purge the air from the fuel system.
Show/hide table
Illustration 2 | g01199587 |
Caterpillar Information System:
C175 Generator Set Engines Engine Oil Cooler - Remove
C6.6 Engines for Caterpillar Built Machines Fuel System - Inspect
C7.1 Engines for Caterpillar Built Machines Engine Oil Cooler - Inspect
C6.6 Engines for Caterpillar Built Machines Fuel System - Prime
C27 and C32 Generator Set Engines E198 Low Fuel Pressure
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C27 and C32 Generator Set Engines E096 High Fuel Pressure
C15 Generator Set Engines E085 Engine Shutdown Overridden
C15 Generator Set Engines Event Codes
C9 On-highway Engine Engine Oil Pan
C15-XQ400 Rental Generator Set Model View Illustrations
C27 and C32 Generator Set Engines CID 0175 FMI 04 Engine Oil Temperature short to ground
C15 Petroleum Generator Set Engines Engine Oil Lines
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Throttle Setup
C9 On-highway Engine Water Pump
Guideline for Examining Failed Parts{1000, 7000} Guideline for Examining Failed Parts{1000, 7000}
C6.6 Industrial Engine Electronic Control System
C175 Generator Set Engines Engine Oil Cooler - Install
C15 Petroleum Generator Set Engines Speed Sensor
C15 Generator Set Engines Electrical Power Supply Circuit - Test
C9-XQ300 Rental Generator Set Additional Messages
2005/09/01 New Software is Now Used {7620}
G3500 Engines Manual Stop Procedure
C32 Petroleum Engines Fuel Filter Base - Remove