Final Drive and Travel Motor - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position final drive and travel motor (4). Install bolts (3) .
Show/hide table
Illustration 1 | g01188965 |
- Connect hose (2) and hose assemblies (5) .
- Install plate (1) .
Show/hide table
Illustration 2 | g01188953 |
End By: Install the sprocket. Refer to Disassembly and Assembly, "Sprocket - Remove and Install".
Caterpillar Information System:
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Turbocharger - Remove
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
C6.6 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
3126B Engine for Caterpillar Built Machines Coolant in Engine Oil
C15 Petroleum Generator Set Engines Alternator and Regulator
325D and 329D Excavators Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
365C Excavator Machine Systems Swivel - Install
365C Excavator Machine Systems Swivel - Remove
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil - Change
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Install
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Remove
Pin Grabber Quick Hitch Plate Locations and Film Locations
304C and 305C Mini Hydraulic Excavators Machine Systems Load Control Valve (Boom Cylinder) - Remove and Install
365C Excavator Machine Systems Swing Control Valve - Remove
365C Excavator Machine Systems Swing Control Valve - Install
390D Excavator Machine Systems Cab - Remove
390D Excavator Machine Systems Cab - Install
2005/12/05 Improved Valve Springs are Now Used {1100, 1108}
325D and 329D Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
302.5C Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
325D and 329D Excavators Hydraulic System Relief Valve (Crossover) - Test and Adjust
365C Excavator Machine Systems Drift Reduction Valve (Stick) - Remove
365C Excavator Machine Systems Drift Reduction Valve (Stick) - Install
365C Excavator Machine Systems Drift Reduction Valve (Stick) - Disassemble