Removal Procedure
Start By:
- Remove the sprocket. Refer to Disassembly and Assembly, "Sprocket - Remove and Install".
- Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
- Remove plate (1) .
Illustration 1 | g01188953 |
- Disconnect hose (2) and hose assemblies (5) .
Illustration 2 | g01188965 |
- Remove bolts (3). Remove final drive and travel motor (4) .