525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Caterpillar


Clutch (Forward High, Forward Low)

Usage:

525C 525



Illustration 1g01214760

Note: The following dimensions for the thickness of new clutch discs and of new clutch plates do not include the running clearance of the clutch pack. To measure the running clearance, refer to Testing and Adjusting, RENR8891, "Transmission Clutch Running Clearance - Check".

(1) Forward Low Clutch Pack

Thickness of seven new clutch discs, seven new clutch plates and one new end plate ... 57.00 ± 1.20 mm (2.244 ± 0.047 inch)
Thickness of one new friction disc ... 4.00 ± 0.08 mm (.157 ± 0.003 inch)
Minimum allowable thickness for reusability ... 3.80 mm (0.149 inch)
Thickness of one new plate ... 3.00 ± 0.08 mm (.118 ± 0.003 inch)
Thickness of one new end plate ... 8.00 ± 0.08 mm (.315 ± 0.003 inch)

(2) Forward High Clutch Pack

Thickness of five new clutch discs, five new clutch plates, and one new end plate ... 43.00 ± 0.88 mm (1.693 ± 0.035 inch)
Thickness of one new friction disc ... 4.00 ± 0.08 mm (0.157 ± 0.003 inch)
Minimum allowable thickness for reusability ... 3.80 mm (0.149 inch)
Thickness of one new plate ... 3.00 ± 0.08 mm (0.118 ± 0.003 inch)
Thickness of one new end plate ... 8.00 ± 0.08 mm (.315 ± 0.003 inch)

(3) Depth for installation of sleeve bearing ... 1.0 ± 0.3 mm (0.039 ± .012 inch)

(4) Bearing and Shaft

Diameter of the bearing after assembly ... 65.046 ± 0.039 mm (2.5609 ± 0.0015 inch)
Diameter of the shaft in bearing area ... 64.961 ± 0.010 mm (2.5575 ± 0.0004 inch)

(5) Depth for installation of sleeve bearing ... 1.0 ± 0.3 mm (0.039 ± 0.012 inch)

(6) Bearing and Shaft

Diameter of the bearing after assembly ... 65.046 ± 0.039 mm (2.5609 ± 0.0015 inch)
Diameter of the shaft in bearing area ... 64.961 ± 0.010 mm (2.5575 ± 0.0004 inch)

(7) 6Y-8285 Seal Ring

End clearance ... 0.70 ± 0.20 mm (0.028 ± 0.008 inch)

Caterpillar Information System:

Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256} Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (First, Third)
C32 Marine Engines Rocker Arm and Shaft - Remove
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Output Transfer Gears
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Brake and Hydraulic Fan System Troubleshooting
C32 Marine Engines Valve Mechanism Cover Base - Remove and Install
990H Wheel Loader and 844H Wheel Dozer Steering System Steering High Pressure System
2005/07/25 Tube Assemblies for the Hydraulic Tank Have Been Replaced {5056, 5057}
AD45B Underground Articulated Truck Hydraulic System Control Valve (Hoist/Ejector) - Ejector Body Machine
2005/07/25 New Axle Shafts Are Now Used On Certain Wheel Tractor-Scrapers {4051}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Loader Frame from Rear Frame - Separate
C32 Marine Engines Rocker Arm and Shaft - Install
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (Reverse, Second)
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Pump - Remove
AD45B Underground Articulated Truck Hydraulic System Relief Valve (Hoist Dual Stage) - Test and Adjust
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Pump - Install
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Front Axle Mounting
Bench Test Procedure For A 980C Wheel Loader Transmission {3030, 3073, 3101} Bench Test Procedure For A 980C Wheel Loader Transmission {3030, 3073, 3101}
Installation of Factory Ordered High Intensity Discharge Lights{1429, 1434} Installation of Factory Ordered High Intensity Discharge Lights{1429, 1434}
2007/09/03 Replacement of the 223-3383 Washer Pump As on Certain Motor Graders and Track-Type Tractors {7306}
953C Track-Type Loader Power Train Power Train Oil System
C15 Petroleum Generator Set Engines Alternator and Regulator
3126B Engine for Caterpillar Built Machines Coolant in Engine Oil
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.