Air Shutoff - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-6396     | O-Ring Assembly Compound     | -     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install O-ring seal (7) .
Show/hide table
Illustration 1 | g01184778 |
- Position air shutoff housing (5) on the aftercooler and install bolts (6) .
- Install O-ring seals (2) on tube assembly (1). Apply Tooling (A) to the O-ring seals.
- Connect tube assembly (1) to air shutoff housing (5) .
- Install retainers (4) and bolts (3) .
Caterpillar Information System:
784C and 785C Off-Highway Truck/Tractors Match Tire Size - Dual Tire Configuration
3126B Petroleum Engine Air Shutoff - Assemble
3126B Petroleum Engine Air Shutoff - Disassemble
2005/07/01 Diagnostic Codes for the Fuel Pressure Sensor {1718, 7620}
C6.6 Engines for Caterpillar Built Machines Crankshaft Seals
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Assemble
3456 Generator Sets Manual Stop Procedure
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Device Bus Network - Modbus Communications
3456 Generator Sets Starting the Engine - EMCP 3 (If Equipped)
3618 Engine Auxiliary Water Pump - Assemble
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Disassemble
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Install
2005/07/18 A Improved Gasket is Now Available {1151, 1162}
Supplemental Parts and Service Information for the C18 Marine Propulsion Engine {1901, 7470} Supplemental Parts and Service Information for the C18 Marine Propulsion Engine {1901, 7470}
2005/07/01 A Improved Gasket is Now Available {1151, 1162}
C7 and C9 On-Highway Engines Engine Rating Parameters
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0590 - FMI 12
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0700 - FMI 02
G3500 Engines Model View Illustrations
C7 and C9 Marine Engines Engine Cranks but Will Not Start
C13 and C15 On-highway Engines ECM Memory - Test
3126B Generator Set Engine CID 0164 FMI 02 Injector Actuation Pressure signal erratic
TH48-E80 Oil/Gas Transmission Transmission Hydraulic Control - Remove
TH48-E80 Oil/Gas Transmission Transmission Hydraulic Control - Install