Display - Clean
In order to maintain sufficient vision, the display and the camera lens may need to be cleaned periodically due to the environment.
Use a soft, damp cloth with water only in order to clean the display. The display has a soft plastic surface that is easily damaged by any material that is abrasive.
Note: The display is not sealed. The display can not be immersed. The display can not have a pressure wash.
Caterpillar Information System:
C6.6 Industrial Engine Engine Oil Pan
Work Area Vision System Modes Of Operation
Work Area Vision System Safety
C32 Marine and Auxiliary Marine Engines Auxiliary Water Pump - Remove
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Analog Throttle Position Sensor Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Indicator Lamp Circuit - Test
C15 On-Highway Engine Engine Oil Pressure - Test
3126B Petroleum Engine Inlet Air Temperature Sensor - Remove and Install
3126B Petroleum Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C15 On-Highway Engine Inlet Manifold Pressure - Test
C32 Petroleum Generator Sets Speed Sensor - Clean/Inspect
3126B Petroleum Engine Speed/Timing Sensor - Remove and Install
Work Area Vision System Camera - Clean
Work Area Vision System General Information
C15 On-Highway Engine Basic Engine
C4.4 and C6.6 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
Work Area Vision System Display Position Adjustment
Work Area Vision System Display Picture Adjustment - Select Display Settings
Work Area Vision System Display Description
Work Area Vision System Camera Description
C15 Generator Sets Safety Messages
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
2008/07/21 New Inlet Valve Guide Seal and New Cylinder Head Groups {1104, 1225}
C15 On-Highway Engine Electronic Unit Injector - Test