Oil Pump
类型 ... 齿轮驱动差速转子
凸轮数
- 内转子 ... 4
- 外转子 ... 5
Show/hide table
| |
| 图 1 | g00938064 |
(1) 外转子与泵体之间的间隙 ...
Show/hide table
| |
| 图 2 | g00938061 |
|
检查间隙 | |
(2) 内转子到外转子的维修极限 ...
Show/hide table
| |
| 图 3 | g00938799 |
|
检查轴向间隙 | |
(3) 转子组件轴向间隙
- 内转子 ...
0.050 至 0.180 mm (0.0020 至 0.0071 in) - 外转子 ...
0.050 至 0.180 mm (0.0020 至 0.0071 in) - 外转子 ...
将紧固机油泵组件前盖的螺栓拧紧至以下扭矩。 ...
Caterpillar Information System:
C9 Generator Set Engine Crankcase Breather - Clean
C7.1 Engines for Caterpillar Built Machines Front Housing and Covers
C32 Marine and Auxiliary Marine Engines Engine Oil Filter Base - Remove
C15 On-Highway Engine Electronic Unit Injector - Adjust
C3.3 Industrial Engine Accessory Drive - Remove and Install
Caterpillar 270 Air Compressor Air Compressor Leaks Oil
Caterpillar 270 Air Compressor Air Compressor Leaks Coolant
C7.1 Engines for Caterpillar Built Machines Exhaust Manifold
C7.1 Engines for Caterpillar Built Machines Flywheel
C6.6 Industrial Engine Fuel Priming Pump
C6.6 Engines for Caterpillar Built Machines Fuel Injection Lines
C6.6 Industrial Engine Fuel Transfer Pump
Caterpillar 270 Air Compressor Excessive Build-Up and Recover Time
Caterpillar 270 Air Compressor Excessive Oil at Exhaust Ports or Air Strainer
Caterpillar 270 Air Compressor Air Compressor Governor - Test and Adjust
Caterpillar 270 Air Compressor Discharge Valve Leakage - Test
C7.1 (Mech) Industrial Engine Gear Group (Front)
3126B Petroleum Engine Water Temperature Regulator Housing - Remove and Install
C18 Petroleum Generator Sets Generator Lead Connections
C32 Marine and Auxiliary Marine Engines Engine Oil Filter Base - Disassemble
3126B Petroleum Engine Water Temperature Regulator - Remove and Install
3126B Petroleum Engine Flywheel - Remove and Install
C32 Marine and Auxiliary Marine Engines Engine Oil Filter Base - Assemble
C32 Marine and Auxiliary Marine Engines Engine Oil Filter Base - Install