Engine Oil Filter Base - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove the engine oil filters (3).
- Remove bolts (1) and bolts (2).
- Remove engine oil filter base (4).
Show/hide table
Illustration 1 | g01182270 |
Caterpillar Information System:
C15 On-Highway Engine Electronic Unit Injector - Adjust
C3.3 Industrial Engine Accessory Drive - Remove and Install
Caterpillar 270 Air Compressor Air Compressor Leaks Oil
Caterpillar 270 Air Compressor Air Compressor Leaks Coolant
C7.1 Engines for Caterpillar Built Machines Exhaust Manifold
C7.1 Engines for Caterpillar Built Machines Flywheel
C6.6 Industrial Engine Fuel Priming Pump
C6.6 Engines for Caterpillar Built Machines Fuel Injection Lines
C6.6 Industrial Engine Fuel Transfer Pump
C9 Generator Set Fuel System - Prime
C15 and C18 Petroleum Generator Sets After Starting Engine
3512C and 3516C Marine Auxiliary and Generator Set Engines Before Starting Engine
C7.1 Engines for Caterpillar Built Machines Front Housing and Covers
C9 Generator Set Engine Crankcase Breather - Clean
C7.1 (Mech) Industrial Engine Oil Pump
Caterpillar 270 Air Compressor Excessive Build-Up and Recover Time
Caterpillar 270 Air Compressor Excessive Oil at Exhaust Ports or Air Strainer
Caterpillar 270 Air Compressor Air Compressor Governor - Test and Adjust
Caterpillar 270 Air Compressor Discharge Valve Leakage - Test
C7.1 (Mech) Industrial Engine Gear Group (Front)
3126B Petroleum Engine Water Temperature Regulator Housing - Remove and Install
C18 Petroleum Generator Sets Generator Lead Connections
C32 Marine and Auxiliary Marine Engines Engine Oil Filter Base - Disassemble
3126B Petroleum Engine Water Temperature Regulator - Remove and Install