Fuel Priming Pump
Note: Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Show/hide table
| |
| Illustration 1 | g01360958 |
|
Typical example | |
(1) The plunger that is hand operated.
The electric fuel priming pump operates on 12 volts or 24 volts.
Caterpillar Information System:
C6.6 Engines for Caterpillar Built Machines Fuel Injection Lines
C6.6 Industrial Engine Fuel Transfer Pump
C9 Generator Set Fuel System - Prime
C15 and C18 Petroleum Generator Sets After Starting Engine
3512C and 3516C Marine Auxiliary and Generator Set Engines Before Starting Engine
Caterpillar 270 Air Compressor Air Compressor is Noisy
Caterpillar 270 Air Compressor Air Compressor Cycles Constantly
C15 and C18 Petroleum Generator Sets Engine Oil Sample - Obtain
C13 and C15 On-highway Engines Clean Gas Induction - Test
Caterpillar 270 Air Compressor General Troubleshooting Information
Caterpillar 270 Air Compressor No Compression of Air (Unloaded)
2005/07/04 Improved Spacer for the Prechamber Group {1106}
C7.1 Engines for Caterpillar Built Machines Flywheel
C7.1 Engines for Caterpillar Built Machines Exhaust Manifold
Caterpillar 270 Air Compressor Air Compressor Leaks Coolant
Caterpillar 270 Air Compressor Air Compressor Leaks Oil
C3.3 Industrial Engine Accessory Drive - Remove and Install
C15 On-Highway Engine Electronic Unit Injector - Adjust
C32 Marine and Auxiliary Marine Engines Engine Oil Filter Base - Remove
C7.1 Engines for Caterpillar Built Machines Front Housing and Covers
C9 Generator Set Engine Crankcase Breather - Clean
C7.1 (Mech) Industrial Engine Oil Pump
Caterpillar 270 Air Compressor Excessive Build-Up and Recover Time
Caterpillar 270 Air Compressor Excessive Oil at Exhaust Ports or Air Strainer