Caterpillar 270 Air Compressor Caterpillar


Air Compressor is Noisy

Usage:

C13 LEE

Symptom

The air compressor makes excessive noise during operation.

Probable Cause

  • Loose drive gear

Inspect the fit of the drive gear on the air compressor crankshaft. The gear must be completely seated. The nut on the crankshaft or the bolt on the crankshaft must be tight.

Loose drive components may cause damage to the air compressor crankshaft. Replace the air compressor if there is damage to the air compressor crankshaft.

  • Restrictions in the air compressor cylinder head or restrictions in the discharge line

Inspect the discharge line for restrictions. Inspect the discharge port of the air compressor and inspect the discharge line for carbon buildup. Check for proper cooling of the air compressor if carbon buildup is found. Replace the discharge line, if necessary.

  • Worn bearings or damaged bearings

Check for proper oil pressure at the oil inlet port. Refer to the Specifications section for the value for the minimum oil pressure.

Check for high oil temperature. Refer to the Specifications section for the value for the maximum oil temperature.

  • Faulty air compressor

Replace the air compressor if none of these causes exist.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.