302.5C Mini Hydraulic Excavator Machine Systems Caterpillar


Swivel - Install

Usage:

302.5C GBB

Installation Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.


Note: Cleanliness is an important factor. Before the assembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.




    Illustration 1g01181004

  1. Position swivel (7) .

  1. Install four bolts (5) .

  1. Connect hose assemblies (6). Connect three hoses (4) .

  1. Install bracket (8) .



    Illustration 2g01181120

  1. Install cover (3) .



    Illustration 3g01180988

  1. Install plate assembly (2) .



    Illustration 4g01177899

  1. Install floor mat (1) .

  1. Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".

Caterpillar Information System:

GSH15 and GSH20 Orange Peel Grapples Daily Inspection
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Remove
M318C and M322C Excavators Machine Systems Control Manifold (Pilot Oil) - Assemble
M318C and M322C Excavators Machine Systems Control Manifold (Pilot Oil) - Disassemble
325C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Install - Hydraulic Lockout, Swing Brake, and Travel
325C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Remove - Hydraulic Lockout, Swing Brake, and Travel
302.5C Mini Hydraulic Excavator Machine Systems Fuel Tank - Install
302.5C Mini Hydraulic Excavator Hydraulic System Relief Valve (Line)
302.5C Mini Hydraulic Excavator Hydraulic System Relief Valve (Main)
302.5C Mini Hydraulic Excavator Hydraulic System Travel Parking Brake
303.5C CR and 303C CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Pilot)
302.5C Mini Hydraulic Excavator Hydraulic System Travel Motor
2005/06/27 An Improved Fuel Cap is Available {1273}
302.5C Mini Hydraulic Excavator Engine Supplement Flywheel - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Selector Valve (Alternate Pattern Control) - Remove and Install
336D MHPU Mobile Hydraulic Power Unit Hydraulic System Check Valve (Load)
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Bucket - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1160 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1160 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1160 - FMI 06
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Lifting Capacities
303.5C and 303C Mini Hydraulic Excavators Machine Systems Front Idler - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.