Swing Motor - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position swing motor (20) and the O-ring seal.
Show/hide table
Illustration 1 | g01179900 |
- Install bolts (22). Connect six hose assemblies (21) .
- Install floorplates (19) .
Show/hide table
Illustration 2 | g01179888 |
- Install panel (18). Position hoses (17) through the grommets and connect hoses (17) .
Show/hide table
Illustration 3 | g01179863 |
- Position support assembly (13) and install bolts (16) .
Show/hide table
Illustration 4 | g01179835 |
- Connect harness assembly (15). Connect bracket assembly (14) .
- Connect cable assembly (11) and harness assemblies (12) and install the mounting hardware.
Show/hide table
Illustration 5 | g01179772 |
- Install guard assembly (10). Connect harness assembly (9) .
Show/hide table
Illustration 6 | g01179760 |
- Install support assembly (6). Position cable assembly (1) through the floorplate and install grommet (8). Connect cable assembly (1) to support assembly (6). Position hose assemblies (7) through support assembly (6) .
Show/hide table
Illustration 7 | g01179737 |
- Install floor mat (5) .
Show/hide table
Illustration 8 | g01179581 |
- Position plate assembly (3) and install two bolts (4) .
- Install console (2). Connect cable assembly (1) .
Show/hide table
Illustration 9 | g01179536 |
End By:
- Install the pilot valves. Refer to Disassembly and Assembly, "Pilot Valve (Joystick) - Install".
- Install the heater assembly. Refer to Disassembly and Assembly, "Heater Core - Remove and Install".
- Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Caterpillar Information System:
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0581 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0581 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0581 - FMI 03
12M Motor Grader Cooling System Coolant Sample (Level 2) - Obtain
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Relief Valve (Pilot)
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Bucket Hydraulic System
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Relief Valve (Line)
385C Material Handler Hydraulic System Operational Checks
324D and 326D Excavators Specifications
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0271 - FMI 06
M318C and M322C Wheeled Excavators Power Train Drive Shaft - Remove and Install
2005/07/18 The Installation of New Insulation Seals the Sheet Assembly for the Firewall {7251, 7276}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0586 - FMI 12
302.5C Mini Hydraulic Excavator Machine Systems Blower Motor (Heater) - Remove and Install
320D Excavator Fuses - Replace
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Track Roller - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0588 - FMI 09
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Boom Bearings - Remove and Install
C15 Generator Set Product Description
C6.6 Engines for Caterpillar Built Machines Piston and Rings
M318C and M322C Excavators Machine Systems Stick Bearings and Seals - Remove
M318C and M322C Excavators Machine Systems Stick Bearings and Seals - Install
324D and 326D Excavators Capacities (Refill)