Seat - Remove and Install
Removal Procedure
- Adjust seat (1) to the forward position.
Show/hide table
Illustration 1 | g01176322 |
- Remove bolts (2) .
- Remove nuts (3) .
Show/hide table
Illustration 2 | g01176325 |
- Use two people in order to remove seat (1). The weight of seat (1) is approximately 29 (65 lb).
Installation Procedure
- Use two people in order to position seat (1). The weight of seat (1) is approximately 29 kg (65 lb).
Show/hide table
Illustration 3 | g01176325 |
- Install nuts (3) .
- Install bolts (2). Adjust seat (1) .
Show/hide table
Illustration 4 | g01176322 |
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swivel - Remove
302.5C Mini Hydraulic Excavator Engine Supplement Fuel Transfer Pump - Remove and Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unitwith UHD Attachment Demolition Boom Removal
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Track - Remove and Install
325C LCR Excavator Machine Systems Stick - Install
325C LCR Excavator Machine Systems Stick - Remove
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
302.5C Mini Hydraulic Excavator Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
2006/03/27 The Reliability and Durability of the Electric Starting Motor Is Increased {1408, 1417, 1453, 7499}
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Swivel - Assemble
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Condenser - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Selector Valve (Alternate Pattern Control) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Disassemble
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Final Drive and Travel Motor - Assemble
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Front Idler - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Sprocket - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Remove
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Hydraulic Track Adjusters - Remove and Install
322C Excavator Maintenance Interval Schedule