Differential - Disassemble - Rear
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 1U-7502     | 修理台架     | 1     |
B     | 1P-0074     | 滑锤拉拔器总成     | 1     |
C     | 8T-0504     | 拉拔器     | 1     |
8T-0980 | 轴承拔出器     | 1     | |
1P-0510 | 冲头总成     | 1     |
开始:
- 拆下变速箱和后差速器。 请参阅拆解和组装, "变速箱和后差速器 - 拆卸"。
- 将适当的起吊设备连接至变速箱 (1) 上。 变速箱 (1) 的重量约为 29 kg (65 lb)。 拆下螺母 (2) 。 拆下变速箱 (1) 。
Show/hide table
图 1 | g01175882 |
- 将适当的起吊设备连接到终传动和托架 (3) 。 终传动和托架 (3) 的重量约为 156 kg (344 lb)。 卸下螺栓 (4) 。 拆下终传动和托架 (3) 。
Show/hide table
图 2 | g01175883 |
- 拆下半轴 (5) 。
Show/hide table
图 3 | g01175884 |
- 将适当的起吊设备连接在桥壳 (6) 上。 桥壳 (6) 的重量约为 84 kg (185 lb)。 将桥壳 (6) 连接到工具 (A) 上。 拆下螺栓 (7) 。 拆下桥壳 (6) 。
Show/hide table
图 4 | g01175885 |
- 使用工具 (B) ,拆下轴承外圈 (8) 。
Show/hide table
图 5 | g01175886 |
- 拆下垫片 (9) 。
Show/hide table
图 6 | g01175887 |
- 拆下差速器组件 (10) 。
Show/hide table
图 7 | g01175889 |
- 使用工具 (B) ,拆下轴承外圈 (11) 。 拆下垫片 (12) 。
Show/hide table
图 8 | g01175891 |
- 使用工具 (C) 从差速器的齿圈侧拆下轴承内圈 (13) 。
Show/hide table
图 9 | g01175926 |
- 使用工具 (C) 从差速器上拆下轴承内圈。
Show/hide table
图 10 | g00928428 |
- 从差速器壳上拆下螺栓 (14) 。
Show/hide table
图 11 | g01175927 |
- 标记差速器半壳 (15) 的位置,以备组装之用。 拆下差速器半壳 (15) 。
Show/hide table
图 12 | g01175928 |
- 将止推垫圈 (16) 从差速器半壳 (15) 上拆下。
Show/hide table
图 13 | g01175930 |
- 拆下差速齿轮 (17) 。
Show/hide table
图 14 | g01175931 |
Show/hide table
图 15 | g01175932 |
- 将星形齿轮组件 (18) 从差速器半壳 (19) 上拆下。
- 将止推垫圈 (20) 从差速器半壳 (19) 上拆下。
Show/hide table
图 16 | g01175933 |
- 使用适当的压具将差速器半壳 (19) 与齿圈 (21) 分离。
Show/hide table
图 17 | g01175934 |
- 将弹簧销 (22) 从差速器半壳 (19) 上拆下。
Show/hide table
图 18 | g01175936 |
- 将止推垫圈 (23) 和伞齿轮 (24) 从十字轴 (25) 上拆下。
Show/hide table
图 19 | g01175937 |
Caterpillar Information System:
345B Series II Excavator Hydraulic System (Ecomate Attachment) Bucket Hydraulic System
302.5C Mini Hydraulic Excavator Engine Supplement Engine - Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Pilot) - Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Pilot) - Assemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Pilot) - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Pilot) - Remove
Pin Grabber Quick Coupler Spring (Blocking Bar) - Inspect
325D and 329D Excavators Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
325D and 329D Excavators Hydraulic System Pilot Valve (Joystick)
W345C Excavator Cab Tilting
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Swing Motor
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Assemble
M318C and M322C Wheeled Excavators Power Train Differential - Assemble - Rear
Pin Grabber Quick Coupler Spring (Blocking Bar) - Replace
2005/06/27 Improved Engine Oil Coolers are Now Used {1378}
2006/03/27 The Reliability and Durability of the Electric Starting Motor Is Increased {1408, 1417, 1453, 7499}
302.5C Mini Hydraulic Excavator Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
C15 and C18 Petroleum Generator Sets Engine Oil and Filter - Change
325C LCR Excavator Machine Systems Stick - Remove
325C LCR Excavator Machine Systems Stick - Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Track - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unitwith UHD Attachment Demolition Boom Removal