Swivel - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 2     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. |
- Attach Tooling (A) and a suitable lifting device to swivel (3) .
Show/hide table
Illustration 1 | g01172223 |
- Position swivel (3). The weight of swivel (3) is approximately 84 kg (185 lb).
- Connect harness assembly (7) .
Show/hide table
Illustration 2 | g01172222 |
- Connect 13 hose assemblies (8) from swivel (3) .
- Connect hose assemblies (5) and (6) .
Show/hide table
Illustration 3 | g01172221 |
- Connect harness assembly (1) .
Show/hide table
Illustration 4 | g00930546 |
- Install bolts (2) that hold swivel (3) to the machine.
- Connect 13 hose assemblies (4) .
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Lubrication Viscocities and Refill Capacities".
Caterpillar Information System:
M318C and M322C Excavators Machine Systems Swivel - Remove
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Bushings - Lubricate
330D and 336D Excavators Boom/Stick/Bucket Combinations
320D Excavator Fuses - Replace
330D and 336D Excavators Specifications
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Disassemble
Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000} Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000}
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Disassemble
330D and 336D Excavators Plate Locations and Film Locations
M318C and M322C Excavators Machine Systems Swing Drive - Remove
M318C and M322C Excavators Machine Systems Swing Drive - Install
330D and 336D Excavators Alternate Exit
M318C and M322C Excavators Machine Systems Gear Motor (Hydraulic Generator) - Disassemble
M318C and M322C Excavators Machine Systems Gear Motor (Hydraulic Generator) - Assemble
330D and 336D Excavators Engine Oil Level - Check
323D Excavator Engine Oil Level - Check
C9.3 Engines for Caterpillar Built Machines Lubrication System
M318C and M322C Excavators Machine Systems Main Control Valve - Remove
M318C and M322C Excavators Machine Systems Main Control Valve - Install
M318C and M322C Excavators Machine Systems Main Control Valve - Disassemble