Boom/Stick/Bucket Combinations
本机器能配备多种动臂/斗杆/铲斗组合,以适应不同应用之需。
330DL 的铲斗分属两个不同的产品系列。 这两个系列铲斗的名称为 DB 型 和 TB 型 。 这两个铲斗系列以铲斗容量不同来区分。 通常的规则是,当使用较长的斗杆和/或较长的动臂时,使用容量较小的铲斗。 反之,当使用较短的斗杆和/或较短的动臂时,应使用容量较大的铲斗。 这项规则确保机器具有较好的稳定性并可防止机器的结构性损坏。
每一个斗杆的设计都与特定系列的铲斗相匹配。 一个不同系列的铲斗是不能装到一个指定的斗杆上的。
下表列出可匹配的动臂-斗杆-铲斗组合。 根据工作状况和所做工作的类型选择最佳的组合。
Show/hide table
DB 铲斗系列 | ||||||
---|---|---|---|---|---|---|
申请 | 容量 | 宽度 | 标准动臂斗杆 | |||
m3 | yd3 | mm | 英寸 | |
|
|
通用 | 0.94 | 1.23 | 762 | 30 | (1) | (1) |
1.19 | 1.56 | 914 | 36 | (1) | (1) | |
1.46 | 1.91 | 1067 | 42 | (1) | (1) | |
1.73 | 2.26 | 1219 | 48 | (2) | (1) | |
2.00 | 2.62 | 1372 | 54 | (3) | (2) | |
2.27 | 2.97 | 1524 | 60 | (4) | (3) | |
2.55 | 3.34 | 1676 | 66 | (5) | (4) | |
重型作业铲斗 | 0.74 | 0.97 | 762 | 30 | (1) | (1) |
0.95 | 1.24 | 914 | 36 | (1) | (1) | |
1.18 | 1.54 | 1067 | 42 | (1) | (1) | |
1.41 | 1.84 | 1219 | 48 | (1) | (1) | |
1.64 | 2.15 | 1372 | 54 | (2) | (1) | |
1.87 | 2.45 | 1542 | 60 | (3) | (3) | |
2.10 | 2.75 | 1676 | 66 | (4) | (3) | |
2.34 | 3.06 | 1829 | 72 | (5) | (4) | |
重型岩石铲斗 | 0.74 | 0.97 | 762 | 30 | (1) | (1) |
0.95 | 1.24 | 914 | 36 | (1) | (1) | |
1.18 | 1.54 | 1067 | 42 | (1) | (1) | |
1.41 | 1.84 | 1219 | 48 | (2) | (1) | |
1.64 | 2.15 | 1372 | 54 | (3) | (1) | |
Heavy-Duty Power | 0.95 | 1.24 | 914 | 36 | (1) | (1) |
1.40 | 1.783 | 1219 | 48 | (1) | (1) | |
1.63 | 2.13 | 1372 | 54 | (2) | (1) | |
1.86 | 2.43 | 1524 | 60 | (3) | (2) | |
沟渠清理铲斗 | 1.63 | 2.13 | 1524 | 60 | (2) | (1) |
1.91 | 2.50 | 1830 | 72 | (3) | (2) |
Show/hide table
(1) | 物料的最大密度为2100 千克/立方米 (3500磅/立方码) 。 |
(2) | 物料的最大密度为1800 千克/立方米 (3000磅/立方码) 。 |
(3) | 物料最大密度1500 千克/立方米 (2500磅/立方码)。 |
(4) | 物料的最大密度为1200 千克/立方米 (2000磅/立方码) 。 |
(5) | 物料的最大密度为900 千克/立方米 (1500磅/立方码) 。 |
Show/hide table
TB 铲斗系列 | |||||
---|---|---|---|---|---|
申请 | 容量 | 宽度 | 大斗量动臂斗杆 | ||
m3 | yd3 | mm | 英寸 | |
|
重型作业铲斗 | 2.40 | 3.14 | 1676 | 66 | |
2.70 | 3.53 | 1829 | 72 |
注: 注:绝对不要将铲斗翻转当装载机使用。
注: 注:"铲斗的宽度"表示的是最大宽度。
有关更多信息,请咨询 Caterpillar 代理商。
Caterpillar Information System:
320D Excavator Fuses - Replace
330D and 336D Excavators Specifications
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Disassemble
Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000} Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000}
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Disassemble
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Swing Frame and Cylinder Bearings - Lubricate
325D and 329D Excavators Hydraulic System Swivel
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Install
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Bushings - Lubricate
M318C and M322C Excavators Machine Systems Swivel - Remove
M318C and M322C Excavators Machine Systems Swivel - Install
330D and 336D Excavators Plate Locations and Film Locations
M318C and M322C Excavators Machine Systems Swing Drive - Remove
M318C and M322C Excavators Machine Systems Swing Drive - Install
330D and 336D Excavators Alternate Exit
M318C and M322C Excavators Machine Systems Gear Motor (Hydraulic Generator) - Disassemble
M318C and M322C Excavators Machine Systems Gear Motor (Hydraulic Generator) - Assemble
330D and 336D Excavators Engine Oil Level - Check
323D Excavator Engine Oil Level - Check
C9.3 Engines for Caterpillar Built Machines Lubrication System