Specifications
本机器将用于带铲斗的挖掘或者与认可的作业机具一起使用。 在作业循环期间不要移动底盘系统,因为上部结构通常能够与安装设备进行 360 度的回转。 本机器可用于在机器提升能力范围内的目标处理。 当本机器用于目标处理时,使用认可的提升点和提升设备。
Show/hide table
图 1 | g01172080 |
Show/hide table
330D L 挖掘机(1) | |
---|---|
机器重量 | |
总长 (A) | |
总高 (B) | |
尾部半径 (C) | |
总宽 (D) | |
履带板宽度 (E) | |
滚轮中心距离 (F) | |
履带长度 (G) | |
Show/hide table
(1) | 这些技术规格适用于具有 |
(2) | 这些技术规格适用于可选 |
(3) | 这些技术规格适用标准 |
(4) | 这些技术规格适用于可选 |
Show/hide table
330D L 挖掘机(1) | |
---|---|
机器重量 | |
总长 (A) | |
总高 (B) | |
尾部半径 (C) | |
总宽 (D) | |
履带板宽度 (E) | |
滚轮中心距离 (F) | |
履带长度 (G) | |
Show/hide table
(1) | 这些技术规格适用于具有 |
(2) | 这些技术规格适用于可选 |
(3) | 这些技术规格适用于标准 |
(4) | 这些技术规格适用于可选 |
Show/hide table
330D L 挖掘机(1) | |
---|---|
机器重量 | |
总长 (A) | |
总高 (B) | |
尾部半径 (C) | |
总宽 (D) | |
履带板宽度 (E) | |
滚轮中心距离 (F) | |
履带长度 (G) | |
Show/hide table
(1) | 这些技术规格适用于具有 |
(2) | 这些技术规格适用于可选 |
(3) | 这些技术规格适用于可选 |
(4) | 这些技术规格适用于可选 |
Show/hide table
336D L 挖掘机(1) | |
---|---|
机器重量 | |
总长 (A) | |
总高 (B) | |
尾部半径 (C) | |
总宽 (D) | |
履带板宽度 (E) | |
滚轮中心距离 (F) | |
履带长度 (G) | |
Show/hide table
(1) | 这些技术规格适用于具有 |
Show/hide table
336D L 挖掘机(1) | |
---|---|
机器重量 | |
总长 (A) | |
总高 (B) | |
尾部半径 (C) | |
总宽 (D) | |
履带板宽度 (E) | |
滚轮中心距离 (F) | |
履带长度 (G) | |
Show/hide table
(1) | 这些技术规格适用于具有 |
Show/hide table
336D L 挖掘机(1) | |
---|---|
机器重量 | |
总长 (A) | |
总高 (B) | |
尾部半径 (C) | |
总宽 (D) | |
履带板宽度 (E) | |
滚轮中心距离 (F) | |
履带长度 (G) | |
Show/hide table
(1) | 这些技术规格适用于具有 |
Show/hide table
图 2 | g01324223 |
Show/hide table
配备 |
||
无快速连接器 | 快速连接器 | |
最大挖掘深度
(A) |
|
|
在地面的最大伸出距离
(B) |
|
|
最大切削高度
(C) |
|
|
最大装运高度
(D) |
|
|
最小装载高度
(E) |
|
|
|
|
|
最大垂直挖掘深度 | |
|
Show/hide table
图 3 | g01324237 |
Show/hide table
配备 |
||
无快速连接器 | 快速连接器 | |
最大挖掘深度
(A) |
|
|
在地面的最大伸出距离
(B) |
|
|
最大切削高度
(C) |
|
|
最大装运高度
(D) |
|
|
最小装载高度
(E) |
|
|
|
|
|
最大垂直挖掘深度 | |
|
Show/hide table
图 4 | g01324258 |
Show/hide table
配备 |
|
最大挖掘深度
(A) |
|
在地面的最大伸出距离
(B) |
|
最大切削高度
(C) |
|
最大装运高度
(D) |
|
最小装载高度
(E) |
|
|
|
最大垂直挖掘深度 | |
Show/hide table
配备 |
|
最大挖掘深度
(A) |
|
在地面的最大伸出距离
(B) |
|
最大切削高度
(C) |
|
最大装运高度
(D) |
|
最小装载高度
(E) |
|
|
|
最大垂直挖掘深度 | |
Caterpillar Information System:
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Disassemble
Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000} Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000}
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Disassemble
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Swing Frame and Cylinder Bearings - Lubricate
325D and 329D Excavators Hydraulic System Swivel
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Install
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Tip-Over Protective Structure (TOPS) - Inspect
M318C and M322C Excavators Engine Supplement Electric Starting Motor - Remove and Install
320D Excavator Fuses - Replace
330D and 336D Excavators Boom/Stick/Bucket Combinations
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Bushings - Lubricate
M318C and M322C Excavators Machine Systems Swivel - Remove
M318C and M322C Excavators Machine Systems Swivel - Install
330D and 336D Excavators Plate Locations and Film Locations
M318C and M322C Excavators Machine Systems Swing Drive - Remove
M318C and M322C Excavators Machine Systems Swing Drive - Install
330D and 336D Excavators Alternate Exit
M318C and M322C Excavators Machine Systems Gear Motor (Hydraulic Generator) - Disassemble
M318C and M322C Excavators Machine Systems Gear Motor (Hydraulic Generator) - Assemble
330D and 336D Excavators Engine Oil Level - Check