Swing Frame and Cylinder Bearings - Lubricate
Wipe the fittings before you lubricate the fittings.
Show/hide table
Illustration 1 | g01171787 |
301.6C and 301.8C |
Show/hide table
Illustration 2 | g01171713 |
301.6C and 301.8C |
Show/hide table
Illustration 3 | g01236788 |
302.5C |
Apply lubricant to the fittings.
Show/hide table
Illustration 4 | g01171789 |
Apply lubricant to the grease fitting for the bearing on the head end of the swing cylinder.
Caterpillar Information System:
325D and 329D Excavators Hydraulic System Swivel
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Install
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Tip-Over Protective Structure (TOPS) - Inspect
M318C and M322C Excavators Engine Supplement Electric Starting Motor - Remove and Install
M325D MH Material Handler Cab Door
M325D MH Material Handler Storage and Literature Compartment
M325D MH Material Handler Monitoring System
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Travel Alarm - Test
C4.4 Industrial Engine Engine Starting
C4.4 Industrial Engine Burn Prevention
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Remove
Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638} Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638}
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Assemble
Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000} Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000}
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Assemble
330D and 336D Excavators Specifications
320D Excavator Fuses - Replace
330D and 336D Excavators Boom/Stick/Bucket Combinations
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Bushings - Lubricate
M318C and M322C Excavators Machine Systems Swivel - Remove