Installation Procedure (Left Side)
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
| NOTICE |
|---|
Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. |
- Position pilot valve (8). Connect hose assemblies (10). Connect hose (9) .
 | |
| Illustration 1 | g01171633 |
- Position pilot valve (8) onto box assembly (7) .
 | |
| Illustration 2 | g01171607 |
- Position boot (4) out of the way and install screws (5) .
- Install bracket (6) .
- Install top console (2). Install bottom console (3). Install armrest assembly (1) .
 | |
| Illustration 3 | g01171283 |
Installation Procedure (Right Side)
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
| NOTICE |
|---|
Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. |
- Position pilot valve (20). Connect hose assemblies (21). Connect hose (22) .
 | |
| Illustration 4 | g01172148 |
- Position pilot valve (20) onto box assembly (19). Position boot (17) out of the way. Install screws (16) .
 | |
| Illustration 5 | g01172130 |
- Install bracket assembly (18) .
- Install top console (14). Connect harness assemblies (15) .
 | |
| Illustration 6 | g01172023 |
- Install bottom console (13) .
 | |
| Illustration 7 | g01172021 |
- Install armrest assembly (11). Install lever assembly (12).
 | |
| Illustration 8 | g01171995 |