Pistons and Connecting Rods - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 139-9039     | 挡圈钳     | 1     |
B     | 7M-3978     | 活塞环扩张器总成     | 1     |
开始:
- 拆下活塞和连杆。 请参阅拆解和组装, "活塞和连杆 - 拆卸"。
注: 为每个活塞和连接杆组件的部件做标记。 所有部件必须安装回原来的位置。 请勿交换使用部件。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 从连杆 (6) 和连杆盖 (11) 上拆下连杆轴承 (10) 。 从连杆盖 (11) 上拆下定位销 (12) 。
Show/hide table
图 1 | g01171223 |
- 使用工具 (A) 拆下挡圈 (8) 。
- 从活塞上拆下活塞销 (9) 和连杆 (6) 。
- 使用工具 (B) 从活塞上拆下活塞环 (1) 、 (2) 和 (3) 。
- 分离活塞裙 (7) 与活塞顶 (5) 。
注: 安装新轴承时,活塞销轴承 (4) 将被推出连杆 (6) 。
Caterpillar Information System:
C9 Engine for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Remove
793F Off-Highway Truck Differential Warm-up and Break-in
3500 Generator Sets Reference Material
C9 Engine for Caterpillar Built Machines Air Inlet Heater - Install
C4.4 Industrial Engine Monitoring System
C4.4 Industrial Engine Gauges and Indicators
2014/08/07 A New Fuel Transfer Pump Has Been Released {1256}
2005/05/23 A New Fuel Transfer Pump Has Been Released {1256}
C4.4 Industrial Engine Engine Electronics
G3500 Engines Air Starting Motor - Disassemble
C7 On-highway Engine Fuel System
C27 and C32 Industrial and Petroleum Engines Ether Injection System - Test
C4.4 Industrial Engine General Hazard Information
C4.4 Industrial Engine Burn Prevention
C4.4 Industrial Engine Engine Starting
3406E Marine Engine Pistons and Connecting Rods - Assemble
3500 Industrial and Generator Set Engines Magnetic Pickups - Clean/Inspect - If Equipped
C6.6 Industrial Engine Diagnostic Flash Code Retrieval
C4.4 Industrial Engine Before Starting Engine
C4.4 (Mech) Industrial Engine Starting with Jump Start Cables
3500 Industrial and Generator Set Engines Overhaul Considerations
C7 On-highway Engine Cylinder Block Cover Group
3044C Industrial Engine Cold Weather Operation
C27 and C32 Industrial and Petroleum Engines E2143 Low Engine Coolant Level