Hydraulic System Oil Filter (Return) - Replace
Show/hide table
NOTICE |
---|
Hot oil can cause personal injury. Remove the hydraulic oil filler cap only when the engine is stopped. Allow time for the hydraulic system to cool. Remove hydraulic oil filler cap slowly in order to relieve pressure. |
- Open the access door in order to gain access to the hydraulic oil tank. Clean the area thoroughly in order to prevent dirt from entering the filter.
- Slowly remove the hydraulic oil filler cap (1) in order to relieve the pressure in the hydraulic oil tank.
Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.
- Remove the used filter (2).
- Install the new filter.
- Reinstall the hydraulic oil filler cap.
- Close the access door.
Show/hide table
Illustration 1 | g01168349 |
301.6C and 301.8C |
Show/hide table
Illustration 2 | g01168353 |
302.5C |
Caterpillar Information System:
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Cooler Core - Clean
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Level - Check
325C LCR Excavator Machine Systems Main Hydraulic Pump - Install
325C LCR Excavator Machine Systems Main Hydraulic Pump - Remove
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
345C MHPU Mobile Hydraulic Power Unit Specifications - Ultrahigh Demolition Configuration
325C LCR Excavator Machine Systems Swing Motor - Install
325C LCR Excavator Machine Systems Swing Motor - Remove
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Install
M318C and M322C Excavators Engine Supplement Engine - Install
M318C and M322C Excavators Engine Supplement Engine - Remove
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Remove
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Symbols
M318C and M322C Excavators Machine Systems Cab Riser and Frame - Remove and Install
2011/03/09 An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
2005/05/30 The Bearing in the Fan Pump Is Improved {1387, 5073}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
325C LCR Excavator Machine Systems Platform - Remove
324D Excavator Hydraulic System Main Hydraulic System
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil - Change
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Blade Hydraulic System
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Relief Valve (Main)
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Implements and Swing Controls Alternate Patterns - If Equipped
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Main Hydraulic System