Hydraulic System Oil Cooler Core - Clean
Note: Certain work environments may encourage plugging and more frequent cleaning may be required.
Show/hide table
| |
| Illustration 1 | g01167841 |
|
301.6C and 301.8C | |
Show/hide table
| |
| Illustration 2 | g01167843 |
|
302.5C | |
- Open the engine access door.
- Remove the access panel on the right rear corner on the 301.6C and on the 301.8C.
The hydraulic oil cooler core is bolted to the outside edge of the radiator.
- Check for accumulation of dust in the fins of the hydraulic oil cooler.
- Clean the fins of the hydraulic oil cooler with compressed air, pressurized water or steam.
Note: Clean the area between the fins of the oil cooler and the radiator.
- Replace the access panel on the corner.
- Close the engine access door.
Caterpillar Information System:
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Level - Check
325C LCR Excavator Machine Systems Main Hydraulic Pump - Install
325C LCR Excavator Machine Systems Main Hydraulic Pump - Remove
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
345C MHPU Mobile Hydraulic Power Unit Specifications - Ultrahigh Demolition Configuration
325C LCR Excavator Machine Systems Swing Motor - Install
325C LCR Excavator Machine Systems Swing Motor - Remove
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Install
M318C and M322C Excavators Engine Supplement Engine - Install
M318C and M322C Excavators Engine Supplement Engine - Remove
325C LCR Excavator Machine Systems Swing Motor and Swing Drive - Remove
C9.3 Engines for Caterpillar Built Machines Vibration Damper - Check
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil Filter (Return) - Replace
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Symbols
M318C and M322C Excavators Machine Systems Cab Riser and Frame - Remove and Install
2011/03/09 An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
2005/05/30 The Bearing in the Fan Pump Is Improved {1387, 5073}
C9.3 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
325C LCR Excavator Machine Systems Platform - Remove
324D Excavator Hydraulic System Main Hydraulic System
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil - Change
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Blade Hydraulic System
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Relief Valve (Main)
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Implements and Swing Controls Alternate Patterns - If Equipped