A New Aftercooler Core is Used {1063, 1064}
- Engine:
- 3516B (S/N: CPA1-UP; PTA1-UP; CDE1-UP; B5G1-UP; PAG1-UP; BPJ1-UP; BCK1-UP)
- 3516B DI TA (S/N: TAK1-UP)
- 3516B (S/N: CBN1-UP; ZAN1-UP; S2T1-UP; 2JW1-UP; 4BW1-UP; CCX1-UP; FDX1-UP; S2X1-UP)
Description of Change: A new aftercooler core is being used for 3500B Engines. A baffle at each end of the tank improves the distribution of coolant flow within the aftercooler core. This improvement results in a more even distribution of temperature. The new aftercooler core can be assembled with the coolant inlet at either end.
Adaptable To: The 265-9105 Aftercooler Core As is adaptable to all of the Engines that are listed above. Table 1 lists the new parts and the former parts.
Show/hide table
| New Parts and Former Parts | |
| Former Part | New Part |
| 196-9200 | 251-8431 |
| 251-8431 | 265-9105 (1) |
Show/hide table
| ( 1 ) | The 196-9200 Aftercooler Core As was cancelled and replaced by the 251-8431 Aftercooler Core As. The 251-8431 Aftercooler Core As is cancelled and replaced by the 265-9105 Aftercooler Core As . |
Caterpillar Information System:
3500B and 3500C Generator Set Engines Electrical Connectors and Functions
C7 On-highway Engine Turbocharger - Inspect
C27 and C32 Industrial and Petroleum Engines Coolant Level Sensor Circuit - Test
C9.3 Tier 4 Final Engines Finding Top Center Position for No. 1 Piston
2005/05/01 New Full Load Settings and New Full Torque Settings are Now Available {7620}
C280 Marine Auxiliary Engines Too Much Vibration
C4.4 Marine Generator Set Engines Aftercooler - Remove and Install
2005/05/16 New 3500 Marine Propulsion Software Available {7620}
C9.3 Tier 4 Final Engines Water Pump - Test
Yellowmark Noise and Roading Homologation Statement {1062} Yellowmark Noise and Roading Homologation Statement {1062}
C9 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C7 On-highway Engine Cooling System
C9.3 Engines for Caterpillar Built Machines Vibration Damper - Check
C27 and C32 Industrial and Petroleum Engines Electrical Power Supply Circuit - Test
2005/05/23 A New Gasket is Used {1063, 1380}
C280 Marine Engines Fuel Injector Adjustment
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
3500B and 3500C Generator Set Engines MID 036 - CID 0253 - FMI 02 Personality Module mismatch
C9 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C4.4 Marine Auxiliary Generator Set Engine Tube Group
2005/08/01 Improved Fumes Disposal Filter Group Is Now Used on Gas Power Modules {1074}
C27 and C32 Industrial and Petroleum Engines Indicator Lamp Circuit - Test
C280 Marine Engines Restriction of Air Inlet and Exhaust
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Symbols